Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2015 Mini Cooper Petrol 1598cc has had 9 MOT tests on record, passing every one. It has 67,746 miles on the clock, averaging 6,130 miles per year, below the UK average of 7,400.
MOT & Mileage History for EN15 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gap in MOT history
Mileage Analysis
Below average| Latest reading | 67,746 miles |
| Reading date | |
| Miles last year | 5,288 |
| Average per year | 6,130 |
| Mileage consistency | Consistent |
Check EN15 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 9 tests on record
Similar cars to consider
Buyers comparing the Mini Cooper often also look at these models. Check their MOT history and reliability before deciding:
Common faults, what to check, and what to pay
Explore more about the Mini Cooper
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | EN15 CNC |
| Make | Mini |
| Model | Cooper |
| Colour | Red |
| Fuel type | Petrol |
| Engine | 1598cc |
| Year | 2015 |
| First registered | |
| Area code | EN — Chelmsford, Essex |
| Age identifier | 15 — March 2015 to August 2015 |
More EN15 C plates
Browse all EN15 C registrations from Chelmsford.
About EN15 CNC
What car is EN15 CNC?
EN15 CNC is an red Mini Cooper, petrol (1598cc). First registered in Chelmsford in 2015.
What is the mileage of EN15 CNC?
The last recorded mileage for EN15 CNC was 67,746 miles, recorded on 1 Jun 2026 during its most recent MOT test.
Has EN15 CNC passed its MOT?
EN15 CNC has had 9 MOT tests with an 100% pass rate (9 passes, 0 failures). It last passed on 1 Jun 2026.
Is EN15 CNC ULEZ compliant?
Based on its fuel type and registration year, EN15 CNC is likely ULEZ compliant. Petrol post-2005 (Euro 4). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is EN15 CNC?
EN15 CNC is approximately 11 years old. Age identifier 15 means registered between 1 March 2015 and 31 August 2015.