Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2013 Ford Fiesta Petrol 998cc has had 15 MOT tests on record, passing 11 and failing 4 (73% pass rate). It has 88,813 miles on the clock, averaging 7,111 miles per year, below the UK average of 7,400.
MOT & Mileage History for EK63 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Below average| Latest reading | 88,813 miles |
| Reading date | |
| Average per year | 7,111 |
| Mileage consistency | Variable |
Check EK63 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 15 tests on record
Similar cars to consider
Buyers comparing the Ford Fiesta often also look at these models. Check their MOT history and reliability before deciding:
Common faults, what to check, and what to pay
Explore more about the Ford Fiesta
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | EK63 CNC |
| Make | Ford |
| Model | Fiesta |
| Colour | White |
| Fuel type | Petrol |
| Engine | 998cc |
| Year | 2013 |
| First registered | |
| Area code | EK — Chelmsford, Essex |
| Age identifier | 63 — September 2013 to February 2014 |
More EK63 C plates
Browse all EK63 C registrations from Chelmsford.
About EK63 CNC
What car is EK63 CNC?
EK63 CNC is an white Ford Fiesta, petrol (998cc). First registered in Chelmsford in 2013.
What is the mileage of EK63 CNC?
The last recorded mileage for EK63 CNC was 88,813 miles, recorded on 27 Jul 2026 during its most recent MOT test.
Has EK63 CNC passed its MOT?
EK63 CNC has had 15 MOT tests with a 73% pass rate (11 passes, 4 failures). It last passed on 27 Jul 2026.
Is EK63 CNC ULEZ compliant?
Based on its fuel type and registration year, EK63 CNC is likely ULEZ compliant. Petrol post-2005 (Euro 4). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is EK63 CNC?
EK63 CNC is approximately 13 years old. Age identifier 63 means registered between 1 September 2013 and 28 February 2014.