Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2015 Ford Fiesta Petrol 998cc has had 12 MOT tests on record, passing 8 and failing 4 (67% pass rate). It has 68,114 miles on the clock, averaging 6,590 miles per year, below the UK average of 7,400.
MOT & Mileage History for CK65 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gap in MOT history
Mileage Analysis
Below average| Latest reading | 68,114 miles |
| Reading date | |
| Miles last year | 6,034 |
| Average per year | 6,590 |
| Mileage consistency | Consistent |
Check CK65 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 12 tests on record
Similar cars to consider
Buyers comparing the Ford Fiesta often also look at these models. Check their MOT history and reliability before deciding:
Common faults, what to check, and what to pay
Explore more about the Ford Fiesta
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | CK65 CNC |
| Make | Ford |
| Model | Fiesta |
| Colour | Silver |
| Fuel type | Petrol |
| Engine | 998cc |
| Year | 2015 |
| First registered | |
| Area code | CK — Cardiff, Cymru (Wales) |
| Age identifier | 65 — September 2015 to February 2016 |
More CK65 C plates
Browse all CK65 C registrations from Cardiff.
About CK65 CNC
What car is CK65 CNC?
CK65 CNC is a silver Ford Fiesta, petrol (998cc). First registered in Cardiff in 2015.
What is the mileage of CK65 CNC?
The last recorded mileage for CK65 CNC was 68,114 miles, recorded on 24 Sep 2025 during its most recent MOT test.
Has CK65 CNC passed its MOT?
CK65 CNC has had 12 MOT tests with a 67% pass rate (8 passes, 4 failures). It last passed on 24 Sep 2025.
Is CK65 CNC ULEZ compliant?
Based on its fuel type and registration year, CK65 CNC is likely ULEZ compliant. Petrol post-2005 (Euro 4). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is CK65 CNC?
CK65 CNC is approximately 11 years old. Age identifier 65 means registered between 1 September 2015 and 28 February 2016.