Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2013 Hyundai I20 Petrol 1396cc has had 14 MOT tests on record, passing 10 and failing 4 (71% pass rate). It has 59,529 miles on the clock, averaging 4,428 miles per year, well below the UK average of 7,400. The 1.4 MPI engine is known for 1. timing chain tensioner wear & premature chain failure and 2. excessive oil consumption & oil sludge buildup.
MOT & Mileage History for YX63 GPK
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gap in MOT history
Mileage Analysis
Low mileage| Latest reading | 59,529 miles |
| Reading date | |
| Miles last year | 4,981 |
| Average per year | 4,428 |
| Mileage consistency | Variable |
Check YX63 GPK
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 14 tests on record
Similar cars to consider
Buyers comparing the Hyundai I20 often also look at these models. Check their MOT history and reliability before deciding:
Reported issues for this Hyundai I20
These are the most commonly reported problems on Hyundai I20 models (2008–2014), based on owner reports and workshop data across the UK.
1. Timing Chain Tensioner Wear & Premature Chain Failure
The hydraulic tensioner, which maintains tension on the timing chain, fails prematurely—particularly in high-mileage or poorly-maintained engines. When tensioner pressure drops, the chain loses tension and can rattle or, in severe cases, jump timing or snap entirely.[1][2]
2. Excessive Oil Consumption & Oil Sludge Buildup
The G4FA burns or leaks oil faster than typical, exacerbated by carbon and sludge accumulation in the oil system. Poor oil circulation through blocked compression ring galleries and clogged pickup tubes starves bearing surfaces of lubrication, causing additional wear and further oil consumption.[2][4]
Explore more about the Hyundai I20
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | YX63 GPK |
| Make | Hyundai |
| Model | I20 |
| Colour | Grey |
| Fuel type | Petrol |
| Engine | 1396cc |
| Year | 2013 |
| First registered | |
| Area code | YX — Beverley, Yorkshire |
| Age identifier | 63 — September 2013 to February 2014 |
More YX63 G plates
Browse all YX63 G registrations from Beverley.
About YX63 GPK
What car is YX63 GPK?
YX63 GPK is a grey Hyundai I20, petrol (1396cc). First registered in Beverley in 2013.
What is the mileage of YX63 GPK?
The last recorded mileage for YX63 GPK was 59,529 miles, recorded on 6 Oct 2025 during its most recent MOT test.
Has YX63 GPK passed its MOT?
YX63 GPK has had 14 MOT tests with a 71% pass rate (10 passes, 4 failures). It last passed on 6 Oct 2025.
Is YX63 GPK ULEZ compliant?
Based on its fuel type and registration year, YX63 GPK is likely ULEZ compliant. Petrol post-2005 (Euro 4). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is YX63 GPK?
YX63 GPK is approximately 13 years old. Age identifier 63 means registered between 1 September 2013 and 28 February 2014.