Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2002 Skoda Fabia Diesel 1896cc has had 14 MOT tests on record, passing 9 and failing 5 (64% pass rate). It has 151,103 miles on the clock, averaging 11,213 miles per year, above the UK average of 7,400. Common Skoda Fabia issues include 1. central locking system failures and 2. rear door seals leaking – water ingress into footwells.
MOT & Mileage History for YG52 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Above average| Latest reading | 151,103 miles |
| Reading date | |
| Average per year | 11,213 |
| Mileage consistency | Variable |
Check YG52 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 14 tests on record
Similar cars to consider
Buyers comparing the Skoda Fabia often also look at these models. Check their MOT history and reliability before deciding:
Reported issues for this Skoda Fabia
These are the most commonly reported problems on Skoda Fabia models (2000–2007), based on owner reports and workshop data across the UK.
1. Central Locking System Failures
The locking motor—especially the one controlling boot opening—wears out or develops internal faults. Wiring can also corrode or break, particularly at connection points.[1] Poor earth connections are a documented issue on early models.[3] · Typical repair: £150–£350 per door/latch (parts £40–120, labour £100–200). Boot motor replacement: £200–400.
2. Rear Door Seals Leaking – Water Ingress into Footwells
The rubber seals around the rear doors degrade with age and UV exposure, allowing rainwater to enter the cabin. The seal material hardens and loses its compression over time. Drain holes at the base of rear doors can also become blocked.[3] · Typical repair: Seal replacement: £120–250 per door. Preventative cleaning of drain holes: £30–50.
3. Electrical Glitches – Persistent Warning Lights and Sensor Faults
Corroded earth connections (particularly under the battery and behind the near-side front wheel liner) cause voltage drop and sensor malfunction. Coolant temperature sensors corrode, triggering false low-coolant warnings. Bulb holders accumulate moisture and corrosion, causing flickering headlights and persistent bulb-failure warnings. Window switches develop microswitch failures.[3] · Typical repair: Cleaning/remaking earth connections: £80–150. Coolant sensor replacement: £40–80 (parts £15–30, labour £25–50). Bulb holder cleaning/replacement: £30–60 per location.
4. Dashboard Rattles and Creaks
Dashboard panels work loose at their mounting points due to vibration and age, causing annoying rattles and creaks, particularly over bumps.[1] · Typical repair: £60–120 (labour to locate and tighten/shim fasteners; very few parts needed)
Explore more about the Skoda Fabia
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | YG52 CNC |
| Make | Skoda |
| Model | Fabia |
| Colour | Grey |
| Fuel type | Diesel |
| Engine | 1896cc |
| Year | 2002 |
| First registered | |
| Area code | YG — Leeds, Yorkshire |
| Age identifier | 52 — September 2002 to February 2003 |
More YG52 C plates
Browse all YG52 C registrations from Leeds.
About YG52 CNC
What car is YG52 CNC?
YG52 CNC is a grey Skoda Fabia, diesel (1896cc). First registered in Leeds in 2002.
What is the mileage of YG52 CNC?
The last recorded mileage for YG52 CNC was 151,103 miles, recorded on 2 Mar 2016 during its most recent MOT test.
Has YG52 CNC passed its MOT?
YG52 CNC has had 14 MOT tests with a 64% pass rate (9 passes, 5 failures). It last passed on 2 Mar 2016.
Is YG52 CNC ULEZ compliant?
Based on its fuel type and registration year, YG52 CNC is likely not ULEZ compliant. As a diesel vehicle registered in 2002, it typically does not meet the Euro 6 emission standard required. This is an estimate — confirm with TfL's ULEZ checker.
How old is YG52 CNC?
YG52 CNC is approximately 24 years old. Age identifier 52 means registered between 1 September 2002 and 28 February 2003.