Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2014 Ford Focus Diesel 1560cc has had 10 MOT tests on record, passing every one. It has 80,653 miles on the clock, averaging 7,309 miles per year, below the UK average of 7,400. The 1.6 TDCi engine is known for turbocharger and egr valve. Common Ford Focus issues include door latch failure and squeaky door seals / a-pillar noise.
MOT & Mileage History for AK14 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gap in MOT history
Mileage Analysis
Below average| Latest reading | 80,653 miles |
| Reading date | |
| Miles last year | 6,929 |
| Average per year | 7,309 |
| Mileage consistency | Consistent |
Check AK14 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 10 tests on record
Similar cars to consider
Buyers comparing the Ford Focus often also look at these models. Check their MOT history and reliability before deciding:
Reported issues for this Ford Focus
These are the most commonly reported problems on Ford Focus models (2011–2018), based on owner reports and workshop data across the UK.
Door Latch Failure
Pawl spring tab fractures, causing doors to unlatch unexpectedly while driving. · Typical repair: Free if under DVSA recall R/2015/173 (or Ford 15S26); otherwise £200-£400 per door at indie garage.
Squeaky Door Seals / A-Pillar Noise
Seals loosen or degrade, allowing wind noise and vibration. · Typical repair: £50-£150 (new seals + labour).
Excessive Battery Discharge / BCM Water Ingress
Washer fluid leaks down wires into BCM, causing drain and fault codes. · Typical repair: £100-£250 (clean BCM + new pump if needed).
Powershift Gearbox Jerking/Shuddering (Auto Variants Only)
Clutch wear or sensor failure causes harsh shifts. · Typical repair: £400-£1,500 (sensor/clutch pack).
Turbocharger (Garrett GT15 variable geometry turbo) – oil feed pipe sludge build-up leading to starvation and failure
EGR valve (exhaust gas recirculation valve and actuator)
Common faults, what to check, and what to pay
Explore more about the Ford Focus
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | AK14 CNC |
| Make | Ford |
| Model | Focus |
| Colour | Silver |
| Fuel type | Diesel |
| Engine | 1560cc |
| Year | 2014 |
| First registered | |
| Area code | AK — Peterborough, Anglia |
| Age identifier | 14 — March 2014 to August 2014 |
More AK14 C plates
Browse all AK14 C registrations from Peterborough.
About AK14 CNC
What car is AK14 CNC?
AK14 CNC is an silver Ford Focus, diesel (1560cc). First registered in Peterborough in 2014.
What is the mileage of AK14 CNC?
The last recorded mileage for AK14 CNC was 80,653 miles, recorded on 29 Sep 2025 during its most recent MOT test.
Has AK14 CNC passed its MOT?
AK14 CNC has had 10 MOT tests with an 100% pass rate (10 passes, 0 failures). It last passed on 29 Sep 2025.
Is AK14 CNC ULEZ compliant?
Based on its fuel type and registration year, AK14 CNC is likely not ULEZ compliant. As a diesel vehicle registered in 2014, it typically does not meet the Euro 6 emission standard required. This is an estimate — confirm with TfL's ULEZ checker.
How old is AK14 CNC?
AK14 CNC is approximately 12 years old. Age identifier 14 means registered between 1 March 2014 and 31 August 2014.