Home / Service Schedules / Mitsubishi 3000
Mitsubishi

Mitsubishi 3000 Service Schedule & Costs

Every service item for the Mitsubishi 3000 — what needs doing, when, and what it should cost at an independent garage versus a main dealer.

Z16A (1990–2000)3.0 V6

Mitsubishi 3000 service: key facts

Routine service items

These are the items covered in a standard service. Most garages include oil, oil filter and a basic inspection. The rest are typically checked or replaced on a schedule.

Service itemIntervalTypical cost
Engine oil and filter
Manufacturer recommends 6,000 miles or 6 months.
Z16A
6,000 miles or 6 months
£80–£120
Dealer: £150–£200

Major service items

These are the big-ticket items. Miss them and you risk engine or gearbox damage. The costs are higher but the consequences of skipping are much worse.

Service itemIntervalTypical cost
Timing belt
Replace timing belt, tensioner, and water pump together.
Z16A
60,000 miles or 5 years
£400–£600
Dealer: £700–£1000

Periodic maintenance

Items that don't need doing at every service but should be on your radar at the right mileage or age.

Service itemIntervalTypical cost
Spark plugs
Use OEM specification plugs. Turbocharged variants may require more frequent replacement due to higher combustion pressures. Check plug condition at each service for signs of running issues.
Z16A
30,000 miles or 3 years
£80–£120
Dealer: £120–£180
Brake fluid
Replace every 2 years regardless of mileage. Use DOT 4 brake fluid. Performance variants with Brembo brakes may benefit from high-temperature brake fluid for track use.
Z16A
2 years
£60–£90
Dealer: £100–£140
Coolant flush
Use manufacturer-specified long-life coolant. Critical for turbocharged variants due to higher operating temperatures. Flush should include heater matrix and expansion tank cleaning.
Z16A
60,000 miles or 5 years
£100–£150
Dealer: £150–£220

Known issues to watch for

The most common problems reported on the Mitsubishi 3000, ranked by severity.

dangerous
Subframe mounting point corrosion (Z16A)
The steel subframe mounting points in the body shell are prone to corrosion that weakens the load-bearing structure around suspension component mounting areas.
dangerous
Brake pipe corrosion (Z16A)
Brake pipes on this model are prone to corrosion, failing at 4.8x the national fleet average according to MOT data.
major
Transmission shaft bearing wear (Z16A)
The transmission output shaft bearings on this model are prone to excessive wear, particularly on higher mileage examples.
major
Suspension component corrosion (Z16A)
Suspension components on this model suffer from corrosion damage at 8.3x the national fleet average, with the trend worsening.

1 more known issues tracked. Check a specific car's history to see what matters for its age and mileage.

Check a Mitsubishi 3000's service history

Enter a reg to see franchised dealer service records — dates, mileage, and work done at every visit.

Check service history

£6.99 · Full refund if no records found

Related

Mitsubishi 3000 service FAQs

How often should a Mitsubishi 3000 be serviced?

A Mitsubishi 3000 should have an oil service every 6,000 miles or 6 months, whichever comes first. Manufacturer recommends 6,000 miles or 6 months.

How much does a Mitsubishi 3000 service cost?

A basic service at an independent garage typically costs £80–£120. Main dealer servicing is usually £150–£200. Major items like timing belts or gearbox services cost significantly more.

Can I service a Mitsubishi 3000 at an independent garage?

Yes. Under UK consumer law, using an independent garage does not void your manufacturer warranty, provided they use parts meeting the manufacturer's specification and follow the correct schedule. However, independent services won't appear in the franchised dealer digital records.