Mitsubishi 3000 car check
Find out if a 3000 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.
Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.
- MOT failure rate
- 29.2%48 tests
- Known problems
- 5across Z16A
- Full report
- £7.49one-off, no subscription
Which 3000 are you looking at?
Each 3000 generation has its own weak spots. Here are the known problems.
-
Subframe mounting point corrosion
Safety risk Z16AThe steel subframe mounting points in the body shell are prone to corrosion that weakens the load-bearing structure around suspension component mounting areas. This affects the structural integrity of the car's handling and safety systems. The problem worsens with age and is particularly severe on UK cars due to road salt exposure.
What to check: Inspect the visible subframe mounting points from underneath the car, looking for brown rust staining, flaking metal, or visible holes in the mounting bracket areas. Check for any sagging or misalignment of the subframe relative to the body shell. Look for previous welding repairs around the rear...
-
Brake pipe corrosion
Safety risk Z16ABrake pipes on this model are prone to corrosion, failing at 4.8x the national fleet average according to MOT data. The trend is worsening, with 519 recorded failures across multiple mileage bands. Steel brake pipes are particularly vulnerable to UK road salt conditions, and failure represents an immediate safety hazard with potential for complete brake system failure.
What to check: Inspect all visible brake pipes along their length, looking for brown rust staining, flaking metal, or wet spots indicating fluid leaks. Check brake fluid level in the reservoir - low fluid may indicate a leak somewhere in the system. Look for rust staining on the ground where the car has been pa...
-
Transmission shaft bearing wear
Wear item Z16AThe transmission output shaft bearings on this model are prone to excessive wear, particularly on higher mileage examples. MOT data shows this specific defect occurring at 122x the national fleet average between 80,000-100,000 miles. The failure rate is improving, suggesting remaining examples may have already been repaired or scrapped. This affects power transmission and can lead to complete drivetrain failure if not addressed.
What to check: Check for oil leaks around the transmission output areas, which may indicate seal failure due to bearing wear. Ask about any recent transmission work or unusual drivetrain noises reported by the owner.
-
Suspension component corrosion
Wear item Z16ASuspension components on this model suffer from corrosion damage at 8.3x the national fleet average, with the trend worsening. This typically affects control arms, subframes, and mounting brackets where road salt accelerates corrosion of the steel components. The failure rate is concentrated around 80,000-100,000 miles, suggesting age-related deterioration of protective coatings.
What to check: Inspect visible suspension components for brown rust staining, flaking metal, or obvious corrosion damage. Look particularly at control arm mounting points and suspension subframes. Check for any previous welding repairs which may indicate prior corrosion issues. Look for uneven tyre wear pattern...
-
Lambda sensor failure
Engine damage risk Z16AThis affects the engine's ability to maintain correct fuel mixture, leading to poor fuel economy, rough running, and MOT emissions failures. The high failure rate suggests the sensors are particularly sensitive to fuel quality or operating conditions on this engine.
What to check: Check if the engine management light is illuminated on the dashboard. Ask the owner about recent MOT emissions test results or any reported running issues. Look for black sooty deposits around the exhaust tailpipe which may indicate rich running.
We haven’t flagged any common problems for this generation in our data yet. A history check still tells you about finance, write-offs and theft, and the MOT history shows how this particular car has been looked after.
3000 MOT results
of 3000 MOT tests end in a fail, from 48 tests.
Most common reasons for failing
- Transmission shaft bearing wornBodywork
- Subframe bushes or mounts wornSuspension
- Structural corrosionBodywork
Check the 3000 you’re buying
One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.
Finance, stolen, write-off and owner history data provided by Experian.
What the check includes
- Outstanding finance Experian
- Write-off status Experian
- Stolen vehicle check Experian
- Previous owners and keeper history Experian
- MOT history and advisories DVSA
- Mileage check DVSA
- Known problems for its generation GetCarWise
- How many are left on the road DVLA
3000 questions
Is the Mitsubishi 3000 reliable?
29.2% of 3000 models fail their MOT based on 48 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being subframe mounting point corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.
What are the main problems with a Mitsubishi 3000?
The most serious known issues are subframe mounting point corrosion, brake pipe corrosion, transmission shaft bearing wear. Our car check flags whether a specific 3000 has been written off or had insurance claims linked to these faults.
How do I check if a Mitsubishi 3000 has outstanding finance?
Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.
How do I check if a Mitsubishi 3000 has been written off?
Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N 3000 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.
Can I check a Mitsubishi 3000 for free?
You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.
What does a Mitsubishi 3000 fail its MOT on?
The most common MOT failure on the 3000 is transmission shaft bearing worn. 29.2% of 3000 models fail overall, based on 48 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.
More on the 3000
Other Mitsubishi car checks
Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.