Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2008 Bmw 3 Series Diesel 1995cc has had 14 MOT tests on record, passing 11 and failing 3 (79% pass rate). It has 143,938 miles on the clock, averaging 11,245 miles per year, above the UK average of 7,400. The 320d engine is known for timing chain and tensioner. Common Bmw 3 Series issues include component: footwell module (frm – footraum modul) and component: steering column lock module.
MOT & Mileage History for HY08 JFA
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Above average| Latest reading | 143,938 miles |
| Reading date | |
| Average per year | 11,245 |
| Mileage consistency | Variable |
Check HY08 JFA
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 14 tests on record
Similar cars to consider
Buyers comparing the Bmw 3 Series often also look at these models. Check their MOT history and reliability before deciding:
Reported issues for this Bmw 3 Series
These are the most commonly reported problems on Bmw 3 Series models (2005–2012), based on owner reports and workshop data across the UK.
Component: Footwell Module (FRM – Footraum Modul)
Water ingress corrodes the circuit board, causing electrical failures. · Typical repair: £300-£600 (new/used module + coding at indie BMW specialist).
Component: Steering column lock module
Electronic lock seizes or fails, preventing key turn. · Typical repair: £400-£800 (bypass module or full column replacement).
Component: Manual clutch (affecting manuals only – all engines)
Dual-mass flywheel and clutch plate wear unevenly, causing judder. · Typical repair: £800-£1,200 (full clutch/flywheel kit at indie).
Component: Cabin interior trim and sunroof seals
Plastic clips/cladding loosen; sunroof drains clog, leading to leaks. · Typical repair: £100-£400 (clips/seals cleanout; full headliner £800+ if soaked).
Timing Chain and Tensioner (primary chain, guides, and plastic tensioner components)
Common faults, what to check, and what to pay
Explore more about the Bmw 3 Series
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | HY08 JFA |
| Make | Bmw |
| Model | 3 Series |
| Colour | Black |
| Fuel type | Diesel |
| Engine | 1995cc |
| Year | 2008 |
| First registered | |
| Area code | HY — Portsmouth, Hampshire and Dorset |
| Age identifier | 08 — March 2008 to August 2008 |
More HY08 J plates
Browse all HY08 J registrations from Portsmouth.
About HY08 JFA
What car is HY08 JFA?
HY08 JFA is an black Bmw 3 Series, diesel (1995cc). First registered in Portsmouth in 2008.
What is the mileage of HY08 JFA?
The last recorded mileage for HY08 JFA was 143,938 miles, recorded on 8 Jul 2019 during its most recent MOT test.
Has HY08 JFA passed its MOT?
HY08 JFA has had 14 MOT tests with a 79% pass rate (11 passes, 3 failures). It last passed on 8 Jul 2019.
Is HY08 JFA ULEZ compliant?
Based on its fuel type and registration year, HY08 JFA is likely not ULEZ compliant. As a diesel vehicle registered in 2008, it typically does not meet the Euro 6 emission standard required. This is an estimate — confirm with TfL's ULEZ checker.
How old is HY08 JFA?
HY08 JFA is approximately 18 years old. Age identifier 08 means registered between 1 March 2008 and 31 August 2008.