Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2010 Peugeot 308 Diesel 1997cc has had 19 MOT tests on record, passing 11 and failing 8 (58% pass rate). It has 57,401 miles on the clock, averaging 3,345 miles per year, well below the UK average of 7,400. The 2.0 HDi engine is known for dw10bted4 and camshaft chain stretching. Common Peugeot 308 issues include 1. power steering system failure and 2. handbrake linkage adjustment or cable stretch/failure.
MOT & Mileage History for GV10 HSE
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Low mileage| Latest reading | 57,401 miles |
| Reading date | |
| Miles last year | 8,148 |
| Average per year | 3,345 |
| Mileage consistency | Variable |
Check GV10 HSE
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 19 tests on record
Similar cars to consider
Buyers comparing the Peugeot 308 often also look at these models. Check their MOT history and reliability before deciding:
Reported issues for this Peugeot 308
These are the most commonly reported problems on Peugeot 308 models (2007–2013), based on owner reports and workshop data across the UK.
1. Power steering system failure (electric power steering motor/pump or column module)
Electric power steering motor or control module fails, often from internal wear or electrical glitches in the steering rack/column. · Typical repair: £400-£800 (new rack/module + labour at indie garage; estimated).
2. Handbrake linkage adjustment or cable stretch/failure
Handbrake cable stretches or linkage misadjusts; passenger footwell linkage can snag or operate inadvertently. · Typical repair: £100-£250 (cable/linkage adjust/replace + labour).
3. Bonnet catch/latch wear or misalignment
Bonnet latch mechanism corrodes or cable stretches, causing poor engagement. · Typical repair: £150-£350 (new latch/cable + alignment).
4. Front suspension ball joints wear
Lower ball joints in front suspension arms deteriorate prematurely. · Typical repair: £150-£300 per side (pair of joints + labour).
DW10BTED4
Camshaft chain stretching
Chain elongates over time, leading to poor timing and potential slapping against guides.
Explore more about the Peugeot 308
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | GV10 HSE |
| Make | Peugeot |
| Model | 308 |
| Colour | Black |
| Fuel type | Diesel |
| Engine | 1997cc |
| Year | 2010 |
| First registered | |
| Area code | GV — Brighton, Garden of England |
| Age identifier | 10 — March 2010 to August 2010 |
More GV10 H plates
Browse all GV10 H registrations from Brighton.
About GV10 HSE
What car is GV10 HSE?
GV10 HSE is a black Peugeot 308, diesel (1997cc). First registered in Brighton in 2010.
What is the mileage of GV10 HSE?
The last recorded mileage for GV10 HSE was 57,401 miles, recorded on 10 Oct 2025 during its most recent MOT test.
Has GV10 HSE passed its MOT?
GV10 HSE has had 19 MOT tests with a 58% pass rate (11 passes, 8 failures). It last passed on 10 Oct 2025.
Is GV10 HSE ULEZ compliant?
Based on its fuel type and registration year, GV10 HSE is likely not ULEZ compliant. As a diesel vehicle registered in 2010, it typically does not meet the Euro 6 emission standard required. This is an estimate — confirm with TfL's ULEZ checker.
How old is GV10 HSE?
GV10 HSE is approximately 16 years old. Age identifier 10 means registered between 1 March 2010 and 31 August 2010.