Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2018 Vauxhall Astra Diesel 1598cc has had 9 MOT tests on record, passing 6 and failing 3 (67% pass rate). It has 62,120 miles on the clock, averaging 9,249 miles per year, above the UK average of 7,400.
MOT & Mileage History for DT18 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Above average| Latest reading | 62,120 miles |
| Reading date | |
| Average per year | 9,249 |
| Mileage consistency | Consistent |
Check DT18 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 9 tests on record
Similar cars to consider
Buyers comparing the Vauxhall Astra often also look at these models. Check their MOT history and reliability before deciding:
Common faults, what to check, and what to pay
Explore more about the Vauxhall Astra
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | DT18 CNC |
| Make | Vauxhall |
| Model | Astra |
| Colour | Silver |
| Fuel type | Diesel |
| Engine | 1598cc |
| Year | 2018 |
| First registered | |
| Area code | DT — Shrewsbury, Deeside to Shrewsbury |
| Age identifier | 18 — March 2018 to August 2018 |
More DT18 C plates
Browse all DT18 C registrations from Shrewsbury.
About DT18 CNC
What car is DT18 CNC?
DT18 CNC is a silver Vauxhall Astra, diesel (1598cc). First registered in Shrewsbury in 2018.
What is the mileage of DT18 CNC?
The last recorded mileage for DT18 CNC was 62,120 miles, recorded on 9 Jul 2026 during its most recent MOT test.
Has DT18 CNC passed its MOT?
DT18 CNC has had 9 MOT tests with a 67% pass rate (6 passes, 3 failures). It last passed on 9 Jul 2026.
Is DT18 CNC ULEZ compliant?
Based on its fuel type and registration year, DT18 CNC is likely ULEZ compliant. Diesel post-2015 (Euro 6). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is DT18 CNC?
DT18 CNC is approximately 8 years old. Age identifier 18 means registered between 1 March 2018 and 31 August 2018.