Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2010 Bmw 3 Series Petrol 1995cc has had 18 MOT tests on record, passing 13 and failing 5 (72% pass rate). It has 125,771 miles on the clock, averaging 9,259 miles per year, above the UK average of 7,400. The 320i engine is known for valve cover gasket. Common Bmw 3 Series issues include component: footwell module (frm – footraum modul) and component: steering column lock module.
MOT & Mileage History for DG60 HFA
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gap in MOT history
Mileage Analysis
Above average| Latest reading | 125,771 miles |
| Reading date | |
| Miles last year | 5,737 |
| Average per year | 9,259 |
| Mileage consistency | Consistent |
Check DG60 HFA
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 18 tests on record
Similar cars to consider
Buyers comparing the Bmw 3 Series often also look at these models. Check their MOT history and reliability before deciding:
Reported issues for this Bmw 3 Series
These are the most commonly reported problems on Bmw 3 Series models (2005–2012), based on owner reports and workshop data across the UK.
Component: Footwell Module (FRM – Footraum Modul)
Water ingress corrodes the circuit board, causing electrical failures. · Typical repair: £300-£600 (new/used module + coding at indie BMW specialist).
Component: Steering column lock module
Electronic lock seizes or fails, preventing key turn. · Typical repair: £400-£800 (bypass module or full column replacement).
Component: Manual clutch (affecting manuals only – all engines)
Dual-mass flywheel and clutch plate wear unevenly, causing judder. · Typical repair: £800-£1,200 (full clutch/flywheel kit at indie).
Component: Cabin interior trim and sunroof seals
Plastic clips/cladding loosen; sunroof drains clog, leading to leaks. · Typical repair: £100-£400 (clips/seals cleanout; full headliner £800+ if soaked).
Valve cover gasket
Common faults, what to check, and what to pay
Explore more about the Bmw 3 Series
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | DG60 HFA |
| Make | Bmw |
| Model | 3 Series |
| Colour | Black |
| Fuel type | Petrol |
| Engine | 1995cc |
| Year | 2010 |
| First registered | |
| Area code | DG — Chester, Deeside to Shrewsbury |
| Age identifier | 60 — September 2010 to February 2011 |
More DG60 H plates
Browse all DG60 H registrations from Chester.
About DG60 HFA
What car is DG60 HFA?
DG60 HFA is a black Bmw 3 Series, petrol (1995cc). First registered in Chester in 2010.
What is the mileage of DG60 HFA?
The last recorded mileage for DG60 HFA was 125,771 miles, recorded on 27 May 2025 during its most recent MOT test.
Has DG60 HFA passed its MOT?
DG60 HFA has had 18 MOT tests with a 72% pass rate (13 passes, 5 failures). It last passed on 27 May 2025.
Is DG60 HFA ULEZ compliant?
Based on its fuel type and registration year, DG60 HFA is likely ULEZ compliant. Petrol post-2005 (Euro 4). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is DG60 HFA?
DG60 HFA is approximately 16 years old. Age identifier 60 means registered between 1 September 2010 and 28 February 2011.