Rover Metro car check
Find out if a Metro has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.
Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.
- Known problems
- 5across MK1 to MK2
- Full report
- £7.49one-off, no subscription
Which Metro are you looking at?
Each Metro generation has its own weak spots. Pick the one you’re viewing to see what to check.
-
Subframe mounting point structural failure
Safety risk MK2The rear subframe mounting points on the Metro are part of the main bodyshell structure and are prone to severe corrosion that compromises structural integrity. This affects the load-bearing capacity within the prescribed 30cm zone around suspension mounting points as defined in MOT regulations. The failure typically occurs where the rear trailing arm mounts to the body, creating a dangerous situation where suspension geometry becomes unstable. This is a well-documented weakness of the Metro's pressed steel construction and salt-trap design around the rear suspension.
What to check: Inspect the rear wheel arches from inside the boot area, looking for rust staining, brown powder deposits, or visible holes in the metalwork around where the trailing arms mount. Check underneath the rear of the car with a torch, examining the rear subframe mounting points for severe corrosion, c...
-
Brake system efficiency failure
Safety risk MK2The Metro's brake system suffers from multiple age-related failures that combine to create dangerous braking efficiency problems. The main issues are brake caliper seizure due to corrosion, brake pipe corrosion causing fluid leaks and pressure loss, and brake imbalance across axles. The single-circuit brake system design means that any significant leak or caliper seizure can compromise braking on an entire axle, leading to MOT failures for both efficiency and imbalance defects.
What to check: Check brake fluid level in the master cylinder reservoir - low levels indicate leakage somewhere in the system. Inspect brake pipes under the car for corrosion, particularly around rear axle mounting points and areas exposed to road salt spray. Look for brown staining, flaking rust, or visible pi...
-
Emissions system failure
Engine damage risk MK2The K-Series engines in the Metro are particularly prone to emissions system failures that cause MOT failures at exceptionally high rates. This typically involves the catalytic converter becoming contaminated or damaged due to head gasket failure allowing coolant into the combustion chamber, or lambda sensor failure affecting the air-fuel mixture. The K-Series engine's known head gasket weakness creates a cascade effect where coolant contamination destroys the catalyst and lambda sensors, leading to emissions readings that exceed default limits by significant margins.
What to check: Check the coolant header tank for signs of contamination - look for oil residue on the surface or mayonnaise-like deposits on the filler cap indicating head gasket failure. Examine the exhaust tailpipe for white smoke deposits or crusty white residue indicating coolant burning through the exhaust...
-
CV joint boot deterioration
Wear item MK2The constant velocity joint rubber boots on Metro driveshafts deteriorate at significantly higher rates than typical for the vehicle age due to the boot material specification and design. When the rubber boot splits or tears, it allows water and dirt ingress while letting the protective grease escape, leading to rapid CV joint wear and eventual failure. This is particularly problematic on the outer CV joints which experience greater articulation angles during steering lock.
What to check: Inspect both front CV joint boots visually from underneath the vehicle, looking for splits, tears, or missing sections of rubber. Check around the joint area for escaped grease deposits on the wheel rim or suspension components - this indicates boot failure. Examine the boot clamps to ensure they...
-
Exhaust system corrosion and mounting failure
Wear item MK2The Metro exhaust system suffers from accelerated corrosion of the mild steel construction, particularly at the rear silencer and intermediate pipe joints. The exhaust mounting rubbers also deteriorate rapidly, causing the system to hang low and suffer impact damage from road debris. The combination of corrosion and insecure mounting creates MOT failures at rates significantly higher than fleet average, often requiring complete rear section replacement.
What to check: Inspect the exhaust system visually from the rear of the car, looking for obvious holes, severe corrosion, or sections hanging lower than normal. Check the exhaust mounting rubbers for deterioration, cracking, or complete failure that allows the system to move excessively. Look for black soot dep...
We haven’t flagged any common problems for this generation in our data yet. A history check still tells you about finance, write-offs and theft, and the MOT history shows how this particular car has been looked after.
Check the Metro you’re buying
One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.
Finance, stolen, write-off and owner history data provided by Experian.
What the check includes
- Outstanding finance Experian
- Write-off status Experian
- Stolen vehicle check Experian
- Previous owners and keeper history Experian
- MOT history and advisories DVSA
- Mileage check DVSA
- Known problems for its generation GetCarWise
- How many are left on the road DVLA
Metro questions
What are the main problems with a Rover Metro?
The most serious known issues are subframe mounting point structural failure, brake system efficiency failure, emissions system failure. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Metro has been written off or had insurance claims linked to these faults.
How do I check if a Rover Metro has outstanding finance?
Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.
How do I check if a Rover Metro has been written off?
Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Metro has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.
Can I check a Rover Metro for free?
You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.
More on the Metro
Other Rover car checks
Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.