Home/Car check/Rover/414

Rover 414 car check

Find out if a Rover 414 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
32.6%2k tests
Known problems
5across R8
Full report
£7.49one-off, no subscription

Which 414 are you looking at?

Each 414 generation has its own weak spots. Here are the known problems.

  1. Subframe mounting point corrosion

    Safety risk R8

    The Rover 414 suffers from severe corrosion at subframe mounting points, typically affecting the rear subframe where it attaches to the body shell. This model uses a steel monocoque construction that is vulnerable to salt corrosion, particularly in the mounting bracket areas where water and debris accumulate. The corrosion weakens the structural attachment points that support the suspension and drivetrain, creating a dangerous structural failure risk.

    What to check: Raise the car on a lift or use inspection ramps to examine the rear subframe mounting points from underneath. Look for rust scaling, holes, or cracking in the body metal around where the subframe bolts attach. Push against suspect areas with a screwdriver - soft or flaking metal indicates advance...

  2. Suspension mounting corrosion

    Safety risk R8

    Corrosion affects the prescribed areas within 30cm of suspension mounting points on the Rover 414 body shell. The steel monocoque construction is particularly vulnerable to corrosion around spring seats, shock absorber tops, and suspension arm mounting brackets. This structural corrosion compromises the load-bearing capability of the body shell and affects the integrity of the suspension mounting points.

    What to check: Inspect the top of the rear shock absorber mounts in the boot area - lift the carpet and check for rust, holes or soft metal around the mounting points. Examine the front suspension turrets under the bonnet for corrosion around the top mount bolts and surrounding metal. Check underneath for rust ...

  3. Brake pipe corrosion

    Safety risk R8

    The Rover 414 shows elevated rates of brake pipe corrosion, typically affecting the steel brake lines running along the underside of the vehicle. The brake pipes on this model are vulnerable to corrosion from road salt and moisture, particularly at connection points and where they pass through body panels. Corroded brake pipes can fail suddenly under braking pressure, causing partial or complete brake system failure.

    What to check: Inspect all visible brake pipes underneath the vehicle for rust scaling, pitting, or green copper-coloured corrosion. Pay particular attention to joints and connection points. Look for brake fluid staining on the ground under the car or wet patches on brake pipes indicating active leakage. Check ...

  4. CV joint boot deterioration

    Wear item R8

    The Rover 414 shows high rates of CV joint boot deterioration, particularly on the outer joints. The rubber boots that protect the constant velocity joints from dirt and retain the grease become cracked and split, allowing contamination of the joint mechanism. This model appears particularly susceptible to boot degradation, possibly due to the rubber compound used or the operating angles of the driveshafts.

    What to check: Turn the steering to full lock in both directions and inspect the CV joint boots on both front wheels for splits, cracks, or missing sections of rubber. Look for grease that has been flung out from damaged boots - this appears as dark streaks on the inside of the wheel rim or on surrounding compo...

  5. Suspension component wear

    Wear item R8

    The Rover 414 experiences higher than average wear rates in suspension bushes and joints, particularly affecting the front lower arm bushes and anti-roll bar links. The suspension design appears to load these components heavily, causing accelerated wear of the rubber bushes and ball joints. This model shows wear patterns typical of cars with relatively soft suspension tuning where bushes take significant loads.

    What to check: With the car on level ground, push down firmly on each corner and release - the car should return to its normal position with minimal bouncing. Excessive oscillation indicates worn shock absorbers. Examine visible suspension bushes for cracking, perishing, or separation from their mounting points...

414 MOT results

32.6%

of 414 MOT tests end in a fail, from 1,865 tests.

Most common reasons for failing

  1. Brakes imbalance across an axleBrakes
  2. Seat mounting faultSeatbelts & Airbags
  3. Structural corrosionBodywork

Check the 414 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

414 questions

Is the Rover 414 reliable?

32.6% of 414 models fail their MOT based on 1,865 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being subframe mounting point corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Rover 414?

The most serious known issues are subframe mounting point corrosion, suspension mounting corrosion, brake pipe corrosion. Our car check flags whether a specific 414 has been written off or had insurance claims linked to these faults.

How do I check if a Rover 414 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Rover 414 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N 414 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Rover 414 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Rover 414 fail its MOT on?

The most common MOT failure on the 414 is brakes imbalance across an axle. 32.6% of 414 models fail overall, based on 1,865 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the 414

Other Rover car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.