Home/Car check/Audi/S4

Audi S4 car check

Find out if a Audi S4 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£21,51543 at dealers
MOT failure rate
18.5%6k tests
Known problems
5across B6 to B8
Full report
£7.49one-off, no subscription

Which S4 are you looking at?

Each S4 generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Water pump failure

    Wear item B8

    The water pump on the 3.0 supercharged V6 engine uses a plastic impeller that becomes brittle with age and thermal cycling. The impeller can break apart or the pump bearing can fail, causing complete coolant circulation loss. This engine runs extremely hot under load and will suffer catastrophic damage within minutes if the cooling system fails. The plastic thermostat housing commonly fails at the same mileage, making joint replacement economical.

    What to check: Check the coolant reservoir level and condition - low coolant or brown/rusty coolant suggests pump seal failure. Look for dried coolant residue around the water pump pulley area on the front of the engine. Check for any pooled coolant under the car, particularly towards the front-centre. Ask the ...

  2. DSG mechatronic unit failure

    Wear item B8

    The mechatronic unit controls the DSG dual-clutch transmission and contains hydraulic valves, solenoids, and electronic control circuits. Internal wear of the valve body and contamination from degraded transmission fluid causes erratic gear changes, failure to engage gears, and complete transmission shutdown. The unit requires precise pressure control for clutch engagement and any malfunction affects drivability. Regular fluid changes significantly extend unit life but many owners skip this service.

    What to check: Check the transmission fluid level and condition through the service port - dark, burnt-smelling fluid or metal particles indicate internal wear. Ask for service history specifically showing DSG fluid changes every 40,000 miles - lack of this service dramatically increases failure risk. Connect a...

  3. Thermostat housing failure

    Wear item B8

    The thermostat housing on the 3.0 supercharged engine is made from plastic and develops stress cracks from repeated thermal cycling. The housing typically cracks around the mounting bolts or where the coolant hoses connect, causing external coolant leaks. While not immediately dangerous like water pump failure, the leak will worsen over time and can lead to overheating if left unrepaired. Often replaced together with the water pump as a preventive measure.

    What to check: Check around the thermostat housing (located on top of the engine) for dried coolant residue or white crystalline deposits indicating previous leaks. Inspect the coolant reservoir level - a slowly dropping level over weeks indicates a minor leak. Look for coolant staining on the engine undertray ...

  4. PCV valve failure

    Engine damage risk B8

    The positive crankcase ventilation (PCV) valve on the 3.0 supercharged engine regulates crankcase pressure by allowing combustion gases to be burned in the intake. The valve contains a diaphragm that hardens and splits over time, causing vacuum leaks and unmetered air entering the engine. This results in rough idle, increased oil consumption, and potential damage to the mass airflow sensor from oil vapour contamination.

    What to check: Remove the engine cover and locate the PCV valve on top of the valve cover - look for oil residue around the valve suggesting vacuum leaks. Check the oil level and condition - excessive consumption or thick, black oil may indicate PCV problems allowing combustion gases into the crankcase. Inspect...

  5. Suspension joint wear

    Wear item B6, B7

    The B6 and B7 S4 models show significantly higher rates of suspension joint and bush wear compared to the fleet average, particularly affecting the front control arm bushes and anti-roll bar links. The 4.2 V8 variants are especially prone to this issue, with MOT data showing 9.4 times the fleet average failure rate. The additional weight and performance-oriented suspension setup accelerates wear of rubber components, leading to clunking noises and imprecise handling.

    What to check: Visually inspect the front suspension for obvious wear - look for cracked or split rubber bushes on the control arms and anti-roll bar links. Check the condition of suspension joint dust covers - missing or torn covers allow dirt ingress and accelerate wear. Look under the car for any obvious flu...

What S4s cost at dealers now

From 43 used S4s we track on UK dealer websites.

Typical asking price
£21,515
Typical mileage
61,484 miles
Price change vs last month
-2.9%

S4 MOT results

18.5%

of S4 MOT tests end in a fail, from 6,251 tests.

Most common reasons for failing

  1. Seat mounting faultSeatbelts & Airbags
  2. Brake hoses perished or damagedBrakes
  3. Suspension joint dust cover missing or no longe...Suspension

Check the S4 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

S4 questions

Is the Audi S4 reliable?

18.5% of S4 models fail their MOT based on 6,251 tests analysed. That’s about average for the class. There are 5 known problems to watch for, the most serious being water pump failure. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Audi S4?

The most serious known issues are water pump failure, dsg mechatronic unit failure, thermostat housing failure. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific S4 has been written off or had insurance claims linked to these faults.

How do I check if a Audi S4 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Audi S4 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N S4 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Audi S4 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Audi S4 fail its MOT on?

The most common MOT failure on the S4 is seat mounting fault. 18.5% of S4 models fail overall, based on 6,251 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the S4

Other Audi car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.