Home/Car check/Audi/80

Audi 80 car check

Find out if a Audi 80 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
26%300 tests
Known problems
5across B2 to B4
Full report
£7.49one-off, no subscription

Which 80 are you looking at?

Each 80 generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Suspension bush and joint wear

    Wear item B3, B4

    The Audi 80 B3 and B4 generations suffer from accelerated wear of suspension bushes and ball joints, particularly the front wishbone bushes and rear beam bushes. The rubber compounds used deteriorate faster than contemporary designs, causing excessive play that fails MOT testing. MOT data shows this model fails suspension component checks at 30.1 times the fleet average, indicating a systematic design issue rather than normal wear. The problem is most severe on higher mileage examples and affects both ride quality and directional stability.

    What to check: Rock the car side-to-side while stationary - excessive movement or clunking from the suspension indicates worn bushes. Examine the front wishbone bushes visually by looking up into the wheel arches - cracked or perished rubber with metal-to-metal contact is clearly visible. Check the rear beam mo...

  2. Wheel bearing wear

    Wear item B3, B4

    Wheel bearings on the Audi 80 B3 and B4 generations develop excessive play significantly earlier than contemporary models. MOT data shows this model fails wheel bearing checks at 15.6 times the fleet average, with failures concentrated in the 120,000-150,000 mile range. The hub units are less robust than later designs and are particularly susceptible to wear when driven on poor road surfaces or with incorrect wheel alignment from worn suspension bushes.

    What to check: Jack up each wheel in turn and attempt to rock the wheel top-to-bottom and side-to-side - any movement indicates bearing wear (steering wheels should be checked with the steering lock disengaged). Spin each wheel by hand and listen for grinding, rumbling, or rough rotation - healthy bearings shou...

  3. Shock absorber deterioration

    Wear item B3, B4

    Shock absorbers on the Audi 80 B3 and B4 suffer from premature seal failure and internal wear. MOT data shows shock absorber failures at 9.3 times the fleet average, particularly on high-mileage diesel variants where the additional engine weight accelerates wear. The shock absorber mounting bushes also deteriorate faster than the dampers themselves, creating multiple failure points in the same component area.

    What to check: Examine each shock absorber body for oil leakage - fresh oil indicates recent seal failure while dried oil residue shows historical leakage. Check the condition of the upper mounting bushes by looking for cracked rubber or metal-to-metal contact. Perform a bounce test by pressing down firmly on e...

  4. Brake hose deterioration

    Safety and MOT risk B3, B4

    Flexible brake hoses on the Audi 80 deteriorate faster than contemporary designs, with both the rubber hoses themselves and their metal ferrule connections suffering from accelerated corrosion and cracking. MOT data shows brake hose failures at 8.1 times the fleet average, with ferrule corrosion being particularly problematic. The brake hoses are located in areas exposed to road salt and debris, making them vulnerable to external attack as well as internal deterioration from moisture-contaminated brake fluid.

    What to check: Examine all flexible brake hoses visually for cracking, bulging, or chafing against suspension components - pay particular attention to the areas where the hose flexes during steering and suspension movement. Check the metal ferrule connections at each end of the flexible hoses for rust, corrosio...

  5. CV joint boot deterioration

    Wear item B3, B4

    CV joint boots on the Audi 80 fail at 5.0 times the fleet average according to MOT data, with the rubber boots cracking and splitting earlier than expected. Once the boot fails, road dirt and moisture contaminate the CV joint grease, leading to premature joint wear. The boots are particularly vulnerable to damage from road debris and the effects of ozone deterioration on the rubber compound used.

    What to check: Jack up the front wheels and examine all four CV joint boots (inner and outer on each driveshaft) for splits, cracks, or missing sections of rubber. Look for grease that has been flung out from damaged boots - this appears as dark sticky residue on the inside of the wheel rim or suspension compon...

80 MOT results

26%

of 80 MOT tests end in a fail, from 300 tests.

Most common reasons for failing

  1. Brake hoses perished or damagedBrakes
  2. Suspension component damaged or corrodedSuspension
  3. Suspension pin, bush or joint wornSuspension

Check the 80 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

80 questions

Is the Audi 80 reliable?

26% of 80 models fail their MOT based on 300 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being suspension bush and joint wear. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Audi 80?

The most serious known issues are suspension bush and joint wear, wheel bearing wear, shock absorber deterioration. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific 80 has been written off or had insurance claims linked to these faults.

How do I check if a Audi 80 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Audi 80 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N 80 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Audi 80 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Audi 80 fail its MOT on?

The most common MOT failure on the 80 is brake hoses perished or damaged. 26% of 80 models fail overall, based on 300 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the 80

Other Audi car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.