Home/Car check/Audi/A4

Audi A4 car check

Find out if a Audi A4 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£17,1161,173 at dealers
MOT failure rate
21.5%1.5m tests
Known problems
10across B7 to B9
Full report
£7.49one-off, no subscription

Which A4 are you looking at?

Each A4 generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Oil pump drive hex bolt failure

    Safety risk B7

    The oil pump drive on B7 1.9 TDI PD engines uses a hex bolt that can shear without warning, causing complete loss of oil pressure and catastrophic engine failure within seconds. This is a well-documented failure mode specific to the PD injection system's high mechanical loads. The updated bolt has a different part number but many cars still have the original failure-prone component. Engine rebuild costs typically exceed the car's value, making this a walk-away issue without documented bolt replacement.

    What to check: Request comprehensive service history and look specifically for oil pump drive bolt replacement or PD injection system work. The updated bolt should have invoice documentation from an Audi specialist. Check the engine oil dipstick for any metallic particles or unusual consistency that might indic...

  2. Cam follower failure from HPFP

    Safety risk B7

    The high-pressure fuel pump cam follower on B7 2.0 TFSI engines wears through due to inadequate hardening, destroying the camshaft lobe beneath it. This is the most extensively documented failure mode on EA113 engines, with the follower acting as a sacrificial component. Once the follower wears through, metal debris contaminates the oil system and the camshaft requires replacement. Upgraded followers are available but many cars still have the original component.

    What to check: Pull the engine oil dipstick, wipe clean, and examine the oil in direct sunlight. Look for any metallic sparkle or dark particles suspended in the oil - this indicates cam follower wear debris. Request service history documentation showing cam follower replacement with invoice details. Look for L...

  3. Multitronic CVT gearbox failure

    Safety risk B7

    The Multitronic CVT transmission is notoriously unreliable with widespread failures affecting the steel belt, pulleys, and control systems. Unlike a conventional automatic, this transmission cannot be meaningfully repaired and requires complete replacement when it fails. Symptoms include jerking, slipping, and complete loss of drive. Many specialists refuse to work on Multitronic transmissions due to poor reliability. B8 generation cars with Multitronic should also be avoided.

    What to check: Check the transmission fluid level and colour through the dipstick if fitted, or ask about recent fluid changes. Dark, burnt-smelling fluid indicates internal damage. Request transmission service history - regular 60,000-mile fluid changes are critical but many owners skip this expensive service....

  4. Oil pump chain failure

    Safety risk B8

    The balance shaft oil pump chain can fail on 2008-2012 diesel models, similar to the hex bolt issue on B7 PD engines. When the chain breaks, oil pressure drops to zero causing catastrophic engine failure within minutes. This affects the oil pump drive to the balance shaft module and is most common on CAGA and CJCA engine codes. The failure occurs without warning and typically results in engine replacement rather than repair.

    What to check: Check service history for any balance shaft or oil pump work, particularly around 80,000-100,000 miles when this failure commonly occurs. Examine the engine oil on the dipstick for any metallic particles or unusual consistency indicating recent internal wear. Ask about any oil pressure warning li...

  5. Extreme oil consumption (2009-2012)

    Safety risk B8

    The CAEB engine code EA888 Gen1/2 engines from 2009-2012 have defective piston rings causing oil consumption exceeding 1 litre per 1000 miles. This was subject to a class action lawsuit and warranty extension in the US. The defect is manufacturing-related and affects the oil control rings, leading to oil burning and potential engine damage. Blue smoke from the exhaust and rapid oil level drops are characteristic symptoms.

    What to check: Check the engine oil level on the dipstick and ask the seller how often they top up the oil between services. More than 1 litre per 1000 miles indicates the defect. Look for any blue smoke staining around the exhaust tailpipe that indicates oil burning. Request service history showing frequency o...

  6. Timing chain tensioner failure

    Safety risk B7, B8

    The timing chain tensioner fails allowing chain stretch and potential timing jump on EA113 and early EA888 engines. This is particularly severe on 2008-2013 models where tensioner failure can cause valve-to-piston contact requiring complete engine rebuild. The tensioner uses a plastic guide system that fractures under load. A characteristic cold-start rattle lasting 5-10 seconds indicates imminent failure. Updated tensioner designs are available but many cars retain the original failure-prone component.

    What to check: Request service history for any timing chain work, particularly tensioner and guide replacement. Updated tensioner part numbers should be documented. Ask about any rattling noises on cold starts - timing chain noise is the primary warning sign. Check for any engine management fault codes related ...

  7. Multitronic CVT failure

    Safety risk B8

    The Multitronic CVT continues to be problematic in the B8 generation with the same fundamental reliability issues as B7 cars. The steel belt and pulley system is prone to premature wear causing jerking, juddering, and complete transmission failure. Regular fluid changes help but do not prevent the underlying design weaknesses. Complete replacement is the only repair option when internal components fail, making these transmissions extremely expensive to maintain.

    What to check: Check transmission fluid level and condition - burnt or dark fluid indicates internal damage from overheating. Request complete service history showing 60,000-mile fluid changes which are critical for CVT longevity. Ask about any previous transmission problems, warranty claims, or replacement uni...

  8. Camshaft and injector wear

    Engine damage risk B7

    PD diesel engines use the camshaft to directly operate high-pressure injectors, placing extreme mechanical loads on the cam lobes. This causes accelerated wear of both the camshaft lobes and injector mechanisms. The wear affects injection timing and fuel delivery, reducing power and increasing consumption. This is inherent to the PD injection system design and affects all engines in this family. Replacement requires both camshaft and injector renewal.

    What to check: Check service history for any injector or camshaft work - PD systems require regular injector maintenance every 60,000-80,000 miles. Look for any signs of black smoke staining around the exhaust indicating poor combustion from worn injectors. Ask about recent fuel consumption increases or loss of...

  9. Timing chain tensioner (rear-mounted)

    Engine damage risk B8

    V6 engines mount the timing chain at the rear of the engine requiring complete engine removal for tensioner access. This makes timing chain service extremely expensive compared to four-cylinder engines where the chain is at the front. The tensioner failure symptoms are similar to four-cylinder engines but repair costs are significantly higher due to the labour-intensive engine-out procedure required.

    What to check: Request service history for any timing chain work - V6 timing chain service is expensive and should be well documented. Ask about cold-start rattling which is the primary symptom of timing chain tensioner problems on V6 engines. Check for any engine management fault codes related to camshaft timi...

  10. Carbon buildup on intake valves

    Engine damage risk B7, B8

    Direct injection engines spray fuel directly into the combustion chamber, bypassing the intake valves. This prevents fuel from cleaning carbon deposits off the intake valve stems and ports, leading to severe buildup that restricts airflow. The problem is inherent to direct injection design and affects all EA113 and EA888 engines. Walnut shell blasting is the standard cleaning method, required every 40,000-60,000 miles on affected engines.

    What to check: Request service history for walnut blasting or carbon cleaning - this should be performed every 40,000-60,000 miles on direct injection engines. Ask about any recent loss of power, rough idle, or hesitation that could indicate carbon buildup restricting intake airflow. Check for any engine manage...

What A4s cost at dealers now

From 1,173 used A4s we track on UK dealer websites.

Typical asking price
£17,116
Typical mileage
50,268 miles
Price change vs last month
-7.5%

A4 MOT results

21.5%

of A4 MOT tests end in a fail, from 1,504,556 tests.

Most common reasons for failing

  1. Fluid leakSuspension
  2. Emissions failureExhaust & Emissions
  3. Coil springs brokenSuspension

Check the A4 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

A4 questions

Is the Audi A4 reliable?

21.5% of A4 models fail their MOT based on 1,504,556 tests analysed. That’s about average for the class. There are 10 known problems to watch for, the most serious being oil pump drive hex bolt failure. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Audi A4?

The most serious known issues are oil pump drive hex bolt failure, cam follower failure from hpfp, multitronic cvt gearbox failure. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific A4 has been written off or had insurance claims linked to these faults.

How do I check if a Audi A4 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Audi A4 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N A4 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Audi A4 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Audi A4 fail its MOT on?

The most common MOT failure on the A4 is fluid leak. 21.5% of A4 models fail overall, based on 1,504,556 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the A4

Other Audi car checks

People also check

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.