Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2014 Mitsubishi Asx Diesel 1798cc has had 11 MOT tests on record, passing 10 and failing once (91% pass rate). It has 34,180 miles on the clock, averaging 2,233 miles per year, well below the UK average of 7,400.
MOT & Mileage History for SW14 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failure recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Low mileage| Latest reading | 34,180 miles |
| Reading date | |
| Average per year | 2,233 |
| Mileage consistency | Consistent |
Check SW14 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 11 tests on record
Explore more about the Mitsubishi Asx
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | SW14 CNC |
| Make | Mitsubishi |
| Model | Asx |
| Colour | Grey |
| Fuel type | Diesel |
| Engine | 1798cc |
| Year | 2014 |
| First registered | |
| Area code | SW — Aberdeen, Scotland |
| Age identifier | 14 — March 2014 to August 2014 |
More SW14 C plates
Browse all SW14 C registrations from Aberdeen.
About SW14 CNC
What car is SW14 CNC?
SW14 CNC is an grey Mitsubishi Asx, diesel (1798cc). First registered in Aberdeen in 2014.
What is the mileage of SW14 CNC?
The last recorded mileage for SW14 CNC was 34,180 miles, recorded on 8 May 2026 during its most recent MOT test.
Has SW14 CNC passed its MOT?
SW14 CNC has had 11 MOT tests with an 91% pass rate (10 passes, 1 failure). It last passed on 8 May 2026.
Is SW14 CNC ULEZ compliant?
Based on its fuel type and registration year, SW14 CNC is likely not ULEZ compliant. As a diesel vehicle registered in 2014, it typically does not meet the Euro 6 emission standard required. This is an estimate — confirm with TfL's ULEZ checker.
How old is SW14 CNC?
SW14 CNC is approximately 12 years old. Age identifier 14 means registered between 1 March 2014 and 31 August 2014.