Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2018 Peugeot 3008 Petrol 1200cc has had 6 MOT tests on record, passing 5 and failing once (83% pass rate). It has 39,987 miles on the clock, averaging 5,625 miles per year, below the UK average of 7,400.
MOT & Mileage History for GL68 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failure recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Below average| Latest reading | 39,987 miles |
| Reading date | |
| Miles last year | 5,952 |
| Average per year | 5,625 |
| Mileage consistency | Consistent |
Check GL68 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 6 tests on record
Similar cars to consider
Buyers comparing the Peugeot 3008 often also look at these models. Check their MOT history and reliability before deciding:
Explore more about the Peugeot 3008
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | GL68 CNC |
| Make | Peugeot |
| Model | 3008 |
| Colour | Grey |
| Fuel type | Petrol |
| Engine | 1200cc |
| Year | 2018 |
| First registered | |
| Area code | GL — Maidstone, Garden of England |
| Age identifier | 68 — September 2018 to February 2019 |
More GL68 C plates
Browse all GL68 C registrations from Maidstone.
About GL68 CNC
What car is GL68 CNC?
GL68 CNC is a grey Peugeot 3008, petrol (1200cc). First registered in Maidstone in 2018.
What is the mileage of GL68 CNC?
The last recorded mileage for GL68 CNC was 39,987 miles, recorded on 24 Nov 2025 during its most recent MOT test.
Has GL68 CNC passed its MOT?
GL68 CNC has had 6 MOT tests with an 83% pass rate (5 passes, 1 failure). It last passed on 24 Nov 2025.
Is GL68 CNC ULEZ compliant?
Based on its fuel type and registration year, GL68 CNC is likely ULEZ compliant. Petrol post-2005 (Euro 4). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is GL68 CNC?
GL68 CNC is approximately 8 years old. Age identifier 68 means registered between 1 September 2018 and 28 February 2019.