Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2017 Hyundai I30 Diesel 1582cc has had 6 MOT tests on record, passing every one. It has 47,611 miles on the clock, averaging 2,675 miles per year, well below the UK average of 7,400.
MOT & Mileage History for EA67 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Low mileage| Latest reading | 47,611 miles |
| Reading date | |
| Miles last year | 2,274 |
| Average per year | 2,675 |
| Mileage consistency | Consistent |
Check EA67 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 6 tests on record
Similar cars to consider
Buyers comparing the Hyundai I30 often also look at these models. Check their MOT history and reliability before deciding:
Explore more about the Hyundai I30
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | EA67 CNC |
| Make | Hyundai |
| Model | I30 |
| Colour | Grey |
| Fuel type | Diesel |
| Engine | 1582cc |
| Year | 2017 |
| First registered | |
| Area code | EA — Chelmsford, Essex |
| Age identifier | 67 — September 2017 to February 2018 |
More EA67 C plates
Browse all EA67 C registrations from Chelmsford.
About EA67 CNC
What car is EA67 CNC?
EA67 CNC is an grey Hyundai I30, diesel (1582cc). First registered in Chelmsford in 2017.
What is the mileage of EA67 CNC?
The last recorded mileage for EA67 CNC was 47,611 miles, recorded on 4 Mar 2026 during its most recent MOT test.
Has EA67 CNC passed its MOT?
EA67 CNC has had 6 MOT tests with an 100% pass rate (6 passes, 0 failures). It last passed on 4 Mar 2026.
Is EA67 CNC ULEZ compliant?
Based on its fuel type and registration year, EA67 CNC is likely ULEZ compliant. Diesel post-2015 (Euro 6). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is EA67 CNC?
EA67 CNC is approximately 9 years old. Age identifier 67 means registered between 1 September 2017 and 28 February 2018.