Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2015 Ford Kuga Diesel 1997cc has had 8 MOT tests on record, passing every one. It has 59,869 miles on the clock, averaging 6,682 miles per year, below the UK average of 7,400. The 2.0 TDCi engine is known for g6dg. Common Ford Kuga issues include tailgate catch/latch knocking and gear lever gaiter wear.
MOT & Mileage History for BP15 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Below average| Latest reading | 59,869 miles |
| Reading date | |
| Miles last year | 5,168 |
| Average per year | 6,682 |
| Mileage consistency | Consistent |
Check BP15 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 8 tests on record
Similar cars to consider
Buyers comparing the Ford Kuga often also look at these models. Check their MOT history and reliability before deciding:
Reported issues for this Ford Kuga
These are the most commonly reported problems on Ford Kuga models (2012–2019), based on owner reports and workshop data across the UK.
Tailgate catch/latch knocking
The tailgate catch mechanism wears or loosens, causing play in the latch assembly. · Typical repair: £100-£250 (new catch + labour).[1]
Gear lever gaiter wear
Rubber gaiter around the gear shifter splits or degrades prematurely. · Typical repair: £50-£150 (new gaiter + labour).[1]
Door creaks
Door hinges or seals dry out/wear, causing friction in the door mechanism. · Typical repair: £80-£200 (grease hinges/seals or replace bushes).[1]
Keyless entry door handle sensor failure
Salt/water ingress corrodes sensors in the exterior door handles (keyless models). · Typical repair: £150-£400 (clean/replace handle sensor).[2][3]
G6DG
Explore more about the Ford Kuga
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | BP15 CNC |
| Make | Ford |
| Model | Kuga |
| Colour | Grey |
| Fuel type | Diesel |
| Engine | 1997cc |
| Year | 2015 |
| First registered | |
| Area code | BP — Birmingham, Birmingham |
| Age identifier | 15 — March 2015 to August 2015 |
More BP15 C plates
Browse all BP15 C registrations from Birmingham.
About BP15 CNC
What car is BP15 CNC?
BP15 CNC is a grey Ford Kuga, diesel (1997cc). First registered in Birmingham in 2015.
What is the mileage of BP15 CNC?
The last recorded mileage for BP15 CNC was 59,869 miles, recorded on 6 Jun 2025 during its most recent MOT test.
Has BP15 CNC passed its MOT?
BP15 CNC has had 8 MOT tests with an 100% pass rate (8 passes, 0 failures). It last passed on 6 Jun 2025.
Is BP15 CNC ULEZ compliant?
Based on its fuel type and registration year, BP15 CNC is likely not ULEZ compliant. As a diesel vehicle registered in 2015, it typically does not meet the Euro 6 emission standard required. This is an estimate — confirm with TfL's ULEZ checker.
How old is BP15 CNC?
BP15 CNC is approximately 11 years old. Age identifier 15 means registered between 1 March 2015 and 31 August 2015.