Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2010 Mitsubishi Asx Petrol 1590cc has had 14 MOT tests on record, passing 13 and failing once (93% pass rate). It has 88,629 miles on the clock, averaging 4,314 miles per year, well below the UK average of 7,400.
MOT & Mileage History for AK60 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failure recorded
Average miles/year
Gap in MOT history
Mileage Analysis
Low mileage| Latest reading | 88,629 miles |
| Reading date | |
| Miles last year | 2,973 |
| Average per year | 4,314 |
| Mileage consistency | Consistent |
Check AK60 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 14 tests on record
Explore more about the Mitsubishi Asx
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | AK60 CNC |
| Make | Mitsubishi |
| Model | Asx |
| Colour | Grey |
| Fuel type | Petrol |
| Engine | 1590cc |
| Year | 2010 |
| First registered | |
| Area code | AK — Peterborough, Anglia |
| Age identifier | 60 — September 2010 to February 2011 |
More AK60 C plates
Browse all AK60 C registrations from Peterborough.
About AK60 CNC
What car is AK60 CNC?
AK60 CNC is an grey Mitsubishi Asx, petrol (1590cc). First registered in Peterborough in 2010.
What is the mileage of AK60 CNC?
The last recorded mileage for AK60 CNC was 88,629 miles, recorded on 6 Mar 2026 during its most recent MOT test.
Has AK60 CNC passed its MOT?
AK60 CNC has had 14 MOT tests with an 93% pass rate (13 passes, 1 failure). It last passed on 6 Mar 2026.
Is AK60 CNC ULEZ compliant?
Based on its fuel type and registration year, AK60 CNC is likely ULEZ compliant. Petrol post-2005 (Euro 4). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is AK60 CNC?
AK60 CNC is approximately 16 years old. Age identifier 60 means registered between 1 September 2010 and 28 February 2011.