Home/Car check/Rover/620

Rover 620 car check

Find out if a Rover 620 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
32.5%151 tests
Known problems
5across 620
Full report
£7.49one-off, no subscription

Which 620 are you looking at?

Each 620 generation has its own weak spots. Here are the known problems.

  1. Subframe mounting area corrosion

    Safety risk 620

    The steel structure around suspension mounting points suffers from corrosion that compromises structural integrity. This affects the fundamental safety of the vehicle as weakened mounting points can allow suspension components to detach. The problem worsens with age and exposure to road salt, making cars from the 1990s particularly vulnerable.

    What to check: Inspect the underside around front suspension turrets and rear suspension mounting points for brown rust staining or visible corrosion patches. Look for any welding repairs or metal plates that may indicate previous structural work. Check for rust bubbling through paint on the inner wheel arches ...

  2. Suspension joint dust cover deterioration

    Wear item 620

    Rubber dust covers protecting ball joints and suspension bushes deteriorate at an exceptional rate on this model, with MOT data showing failures at 26.9x the national fleet average. Once split or missing, dirt and water ingress rapidly destroys the underlying joint or bush. This creates a cascade effect where multiple suspension components fail in quick succession, making early detection and replacement crucial for controlling repair costs.

    What to check: Inspect all visible ball joint dust covers around the front suspension for splits, tears, or completely missing rubber boots. Check lower ball joints, track rod ends, and anti-roll bar drop link boots for deterioration. Look for grease leakage around joints indicating compromised dust seals. Exam...

  3. CV joint boot deterioration

    Wear item 620

    Constant velocity joint rubber boots fail at 9.6x the national fleet average according to MOT data. The boots protect the CV joints from dirt and water while retaining the special grease needed for smooth operation. Once compromised, the joints quickly develop wear leading to clicking noises and eventual failure. This is particularly problematic on the 620 due to the age of rubber components and limited availability of replacement boots.

    What to check: Inspect both CV joint boots on each front driveshaft for splits, tears, or missing sections. The inner joint boot sits closer to the gearbox, the outer joint boot is near the wheel. Look for grease spattering on the inside of the wheel rim or suspension components indicating a leaking boot. Check...

  4. Exhaust system corrosion

    Wear item 620

    The exhaust system suffers from accelerated corrosion, failing MOT tests at 8.4x the national fleet average. The rear silencer and intermediate sections are particularly prone to rust-through from both internal moisture and external road salt exposure. Cars from the 1990s typically require partial or complete exhaust replacement during ownership, with the problem starting relatively early in the vehicle's life.

    What to check: Walk around to the rear of the car and visually inspect the exhaust pipe and silencer for obvious holes, rust patches, or hanging sections. Check the exhaust mounting rubbers for perishing - broken mounts cause the system to hang low and suffer damage. Look under the car with a torch for rust hol...

  5. Handbrake cable corrosion and adjustment

    Safety and MOT risk 620

    The handbrake system fails MOT tests at nearly 8x the national fleet average, with common issues including cable corrosion, poor adjustment, and uneven operation between sides. The rear drum brake setup uses cables that corrode internally, causing the handbrake to seize partially applied or fail to hold effectively. This is a particular issue on cars that have not had regular cable maintenance.

    What to check: Apply the handbrake and count how many clicks it takes to hold the car firmly - it should engage within 6-8 clicks. With the handbrake applied, try to push the car gently to check it holds securely on level ground. Check that the handbrake lever returns fully to the down position when released - ...

620 MOT results

32.5%

of 620 MOT tests end in a fail, from 151 tests.

Most common reasons for failing

  1. Suspension joint dust cover severely deterioratedSuspension
  2. Suspension joint dust cover missing or no longe...Suspension
  3. Brake hoses perished or damagedBrakes

Check the 620 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

620 questions

Is the Rover 620 reliable?

32.5% of 620 models fail their MOT based on 151 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being subframe mounting area corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Rover 620?

The most serious known issues are subframe mounting area corrosion, suspension joint dust cover deterioration, cv joint boot deterioration. Our car check flags whether a specific 620 has been written off or had insurance claims linked to these faults.

How do I check if a Rover 620 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Rover 620 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N 620 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Rover 620 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Rover 620 fail its MOT on?

The most common MOT failure on the 620 is suspension joint dust cover severely deteriorated. 32.5% of 620 models fail overall, based on 151 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the 620

Other Rover car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.