Home/Car check/Peugeot/4007

Peugeot 4007 car check

Find out if a 4007 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
25.8%10k tests
Known problems
5across 4007
Full report
£7.49one-off, no subscription

Which 4007 are you looking at?

Each 4007 generation has its own weak spots. Here are the known problems.

  1. Suspension ball joint severe wear

    Safety risk 4007

    The front suspension ball joints on the 4007 show exceptional wear rates compared to the UK fleet average, with MOT data showing failures at 19.3 times the national rate at 80-100k miles. This is a structural joint failure that creates serious risk of wheel detachment. The 4007 shares its platform with the Mitsubishi Outlander and Citroen C-Crosser, and all three models show similar premature ball joint wear patterns. The worsening trend in MOT data suggests this is an inherent design weakness rather than age-related deterioration.

    What to check: Jack up the front of the vehicle and support on axle stands. Grab the wheel at 12 and 6 o'clock positions and rock it vigorously - excessive vertical movement indicates ball joint wear. Grab the wheel at 3 and 9 o'clock positions and rock it - horizontal movement combined with vertical movement c...

  2. Structural corrosion near subframe mountings

    Safety risk 4007

    6 times the average. This indicates systematic corrosion affecting load-bearing structure around the subframe and suspension mounting points. As a tall SUV with higher centre of gravity, structural integrity is critical for safe handling and crashworthiness. The worsening trend suggests this affects most examples as they age.

    What to check: Inspect the area around the front subframe mounting points for rust, corrosion, or structural weakness. Look particularly where the subframe bolts to the main body shell. Check for corrosion around the rear suspension mounting points and shock absorber top mounts. Look for any visible cracking or...

  3. Brake pipe corrosion

    Safety risk 4007

    The 4007 shows brake pipe corrosion at 4.3 times the UK fleet average across all mileage bands from 40k miles upward, with a worsening trend over the 2020-2024 MOT data period. This affects the steel brake lines that carry hydraulic pressure from the master cylinder to the brake calipers. The high failure rate suggests inadequate corrosion protection on the brake line coating or routing through areas prone to salt and moisture retention.

    What to check: Inspect all visible brake lines along their full length for surface rust, pitting, or actual fluid leakage. Pay particular attention to lines near the rear axle and any areas where pipes pass close to the exhaust system. Check brake fluid level in the master cylinder reservoir - a dropping level ...

  4. Front suspension dust cover deterioration

    Wear item 4007

    The 4007 shows extreme rates of suspension joint dust cover deterioration, with MOT failures at 25.3 times the UK fleet average at 40-60k miles. These rubber boots protect ball joints and CV joints from dirt and moisture ingress. When they fail prematurely, they accelerate wear of the expensive joints they protect. The worsening trend indicates this is a systematic material quality issue affecting the entire model range, likely related to the rubber compound specification used.

    What to check: Visually inspect all dust boots around the front suspension ball joints for cracks, splits, or complete failure. Look particularly at the lower ball joints which are most exposed to road dirt. Check CV joint gaiters at the wheel ends of the driveshafts for similar deterioration - these may be aff...

  5. Suspension component corrosion

    Wear item 4007

    MOT data shows suspension component corrosion affecting the 4007 at 8.9 times the fleet average from 60k miles, with the trend worsening year-on-year. This typically affects control arms, anti-roll bar links, and suspension mounting brackets rather than the springs themselves. The 4007's platform design appears particularly susceptible to corrosion in areas where suspension components mount to the body shell, likely due to inadequate protective coating or poor drainage design.

    What to check: Inspect all visible suspension components for surface rust, pitting, or structural corrosion. Focus on control arm bushings, anti-roll bar links, and any suspension brackets. Look for corrosion around suspension mounting bolts - these often show the first signs of structural weakness. Check for a...

4007 MOT results

25.8%

of 4007 MOT tests end in a fail, from 10,450 tests.

Most common reasons for failing

  1. Suspension joint dust cover severely deterioratedSuspension
  2. Anti-roll bar links wornSuspension
  3. Subframe bushes or mounts wornSuspension

Check the 4007 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

4007 questions

Is the Peugeot 4007 reliable?

25.8% of 4007 models fail their MOT based on 10,450 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being suspension ball joint severe wear. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Peugeot 4007?

The most serious known issues are suspension ball joint severe wear, structural corrosion near subframe mountings, brake pipe corrosion. Our car check flags whether a specific 4007 has been written off or had insurance claims linked to these faults.

How do I check if a Peugeot 4007 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Peugeot 4007 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N 4007 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Peugeot 4007 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Peugeot 4007 fail its MOT on?

The most common MOT failure on the 4007 is suspension joint dust cover severely deteriorated. 25.8% of 4007 models fail overall, based on 10,450 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the 4007

Other Peugeot car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.