Home/Car check/Mitsubishi/I

Mitsubishi I car check

Find out if a Mitsubishi I has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
16.7%3k tests
Known problems
5across HA1W
Full report
£7.49one-off, no subscription

Which I are you looking at?

Each I generation has its own weak spots. Here are the known problems.

  1. Subframe mounting area structural weakness

    Safety risk HA1W

    MOT data shows this model fails at 11.5x the national average for load-bearing structure problems within 30cm of subframe mounting points at 60-80k miles. The lightweight construction and small size may concentrate stress around suspension pickup points. This is classified as a dangerous defect by MOT standards as it affects the structural integrity of the vehicle's suspension mounting. Higher mileage examples should be carefully inspected around all suspension attachment areas.

    What to check: Inspect the area around each wheel for visible corrosion or cracking in the body structure where suspension components attach. Pay particular attention to the rear beam mounting points and front subframe area. Check for any signs of previous accident damage or poor repair work around suspension m...

  2. Steering rack gaiter deterioration

    Wear item HA1W

    MOT data shows this model fails at up to 50.2x the national average for steering rack gaiter and ball joint dust cover damage across multiple mileage bands. The high failure rate suggests the rubber components may be particularly prone to splitting or perishing on this model. While not immediately dangerous, damaged gaiters allow dirt and water into steering components, leading to expensive rack replacement if left unrepaired.

    What to check: Turn the front wheels to full lock each way and inspect the steering rack gaiters (rubber boots) at each end of the steering rack for splits, tears, or obvious deterioration. Check ball joint dust covers on track rod ends for similar damage. Look for any grease escape from damaged gaiters - this ...

  3. CV joint boot deterioration

    Wear item HA1W

    MOT data shows this model fails at 15.9x the national average for CV joint boot deterioration at 40-60k miles with a worsening trend. The constant velocity joint boots protect the driveshaft joints from contamination. The high failure rate suggests the rubber compound or design may be inadequate for the operating conditions on this small car.

    What to check: Inspect both front CV joint boots (inner and outer on each side) for cracks, splits, or missing sections of rubber. The boots are located at each end of the front driveshafts. Check for grease escape around damaged boots - this appears as thick black or grey grease flung around the wheel area. Lo...

  4. Suspension joint dust cover deterioration

    Wear item HA1W

    MOT data shows this model fails at 21.3x the national average for suspension joint dust cover deterioration at 40-60k miles with a worsening trend. These protective covers prevent contamination of ball joints and suspension pivots. The high failure rate suggests the rubber compounds may not be suitable for UK climate conditions or the suspension design creates excessive stress on these components.

    What to check: Inspect all visible suspension ball joint dust covers for cracks, splits, or missing rubber sections. Check both front and rear suspension components. Look for escaped grease around damaged covers indicating the protective seal has failed. Check anti-roll bar link dust covers if fitted. Examine s...

  5. Excessive fluid leakage

    Engine damage risk HA1W

    MOT data shows this model fails at 4.9x the national average for excessive fluid leakage at 40-60k miles with a worsening trend. Given the small engine size and compact packaging, this likely involves oil seepage from gaskets or seals that becomes significant due to the limited fluid capacity. Small leaks become proportionally more serious on vehicles with very small oil sumps.

    What to check: Check the ground under the car for any oil stains or fluid drips after the car has been parked overnight. Inspect around the engine block, particularly the sump gasket and valve cover, for signs of oil seepage. Check the dipstick to ensure oil level is adequate - small engines have limited oil ca...

I MOT results

16.7%

of I MOT tests end in a fail, from 2,858 tests.

Most common reasons for failing

  1. Track rod ends wornSteering
  2. Headlight faultLights & Electrics
  3. Suspension joint dust cover severely deterioratedSuspension

Check the I you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

I questions

Is the Mitsubishi I reliable?

16.7% of I models fail their MOT based on 2,858 tests analysed. That’s about average for the class. There are 5 known problems to watch for, the most serious being subframe mounting area structural weakness. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Mitsubishi I?

The most serious known issues are subframe mounting area structural weakness, steering rack gaiter deterioration, cv joint boot deterioration. Our car check flags whether a specific I has been written off or had insurance claims linked to these faults.

How do I check if a Mitsubishi I has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Mitsubishi I has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N I has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Mitsubishi I for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Mitsubishi I fail its MOT on?

The most common MOT failure on the I is track rod ends worn. 16.7% of I models fail overall, based on 2,858 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the I

Other Mitsubishi car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.