Home/Car check/Hyundai/Getz

Hyundai Getz car check

Find out if a Getz has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£1,9517 at dealers
MOT failure rate
25.9%264k tests
Known problems
5across TB
Full report
£7.49one-off, no subscription

Which Getz are you looking at?

Each Getz generation has its own weak spots. Here are the known problems.

  1. Structural corrosion

    Safety risk TB

    The Getz suffers from severe structural corrosion affecting load-bearing areas within 30cm of suspension mounting points, significantly weakening the vehicle structure. MOT data shows this model fails at 26.6 times the national average for vehicle structure corrosion and 21.2 times the average for weakened load-bearing structure near suspension mounts. The corrosion typically affects the rear subframe mounting areas, floor pan sections, and suspension turret reinforcements. This is a progressive failure that compromises vehicle safety and control.

    What to check: Inspect the rear wheel arches from inside the boot, looking for rust staining, soft metal, or visible holes in the floor pan near the rear suspension mounting points. Check the front suspension turrets (visible when the bonnet is raised) for corrosion around the coil spring mounting points - look...

  2. Suspension component corrosion

    Wear item TB

    Suspension components on the Getz corrode at an exceptionally high rate, with MOT failures occurring 41.6 times more frequently than the national average. The corrosion affects control arms, anti-roll bar links, and mounting brackets across all engine variants and mileage ranges. Suspension component dust covers also fail at 27.9 times the national rate, accelerating corrosion by allowing salt and moisture ingress. This is a progressive issue that affects ride quality, handling, and MOT compliance.

    What to check: Inspect the front suspension components visible through the wheel arches for surface rust, flaking metal, or white corrosion deposits on aluminum parts. Check the anti-roll bar drop links (vertical links connecting the anti-roll bar to the suspension) for corrosion around the ball joints and moun...

  3. CV joint boot deterioration

    Wear item TB

    The Getz has exceptionally high rates of CV joint boot failure, with MOT data showing failure at 43.2 times the national average. The rubber boots protecting the constant velocity joints deteriorate prematurely, allowing grease to escape and dirt to enter the joint. This affects both inner and outer CV joints on all variants and occurs across all mileage ranges including very low-mileage cars. Boot failure eventually leads to CV joint wear and clicking noises during turning.

    What to check: Inspect both front wheel arches for grease spray patterns on the inside of the wheel or arch liner - this indicates a split CV joint boot has been flinging grease during driving. Check the drive shafts visually by looking behind each front wheel - the CV joint boot should appear intact and proper...

  4. Exhaust and induction system leaks

    Wear item TB

    Petrol Getz models suffer from induction and exhaust leaks at an extremely high rate, failing MOT tests at 47.2 times the national average. The issue primarily affects the exhaust manifold gaskets and inlet manifold sealing, causing emissions test failures. This is most severe on the 1.3-litre petrol engine but affects all petrol variants. The problem appears across all mileage ranges and has been worsening over recent years.

    What to check: Inspect the exhaust manifold (visible at the front of the engine) for black staining or soot deposits around the joint with the cylinder head, indicating exhaust gas leakage. Check the inlet manifold connections for vacuum leaks by looking for cracked or disconnected rubber hoses. Listen for hiss...

  5. Power steering system deterioration

    Wear item TB

    The Getz power steering system experiences component failure at 32.5 times the national average, primarily affecting high-pressure hoses, pipes, and pump connections. The issue manifests as corrosion and deterioration of the hydraulic components, leading to fluid leaks and eventual loss of power assistance. This affects all engine variants and becomes more common with higher mileage, though failures have been recorded across all mileage ranges.

    What to check: Check the power steering fluid reservoir (located near the brake fluid reservoir) for fluid level and condition - low level or dark, contaminated fluid indicates system problems. Inspect the engine bay for red or brown fluid stains on the ground or components, indicating power steering leaks. Exa...

What Getzs cost at dealers now

From 7 used Getzs we track on UK dealer websites.

Typical asking price
£1,951
Typical mileage
85,220 miles
Price change vs last month
+20.3%

Getz MOT results

25.9%

of Getz MOT tests end in a fail, from 264,066 tests.

Most common reasons for failing

  1. Emissions failureExhaust & Emissions
  2. Transmission shaft constant velocity joint boot...Bodywork
  3. Transmission joint, belt or chain wornBodywork

Check the Getz you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Getz questions

Is the Hyundai Getz reliable?

25.9% of Getz models fail their MOT based on 264,066 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being structural corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Hyundai Getz?

The most serious known issues are structural corrosion, suspension component corrosion, cv joint boot deterioration. Our car check flags whether a specific Getz has been written off or had insurance claims linked to these faults.

How do I check if a Hyundai Getz has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Hyundai Getz has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Getz has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Hyundai Getz for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Hyundai Getz fail its MOT on?

The most common MOT failure on the Getz is emissions failure. 25.9% of Getz models fail overall, based on 264,066 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Getz

Other Hyundai car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.