Home/Car check/Chrysler/Pt Cruiser

Chrysler Pt Cruiser car check

Find out if a Pt Cruiser has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
30.9%68k tests
Known problems
5across PG
Full report
£7.49one-off, no subscription

Which Pt Cruiser are you looking at?

Each Pt Cruiser generation has its own weak spots. Here are the known problems.

  1. Suspension component catastrophic failure

    Safety risk PG

    Multiple suspension components on the PT Cruiser show extreme failure rates, with MOT data indicating 354.7 times higher failure rate than the fleet average for components becoming detached or compromising directional stability. This affects control arms, anti-roll bar links, and suspension mounting points. The unusual suspension geometry and cost-cutting during production has resulted in premature fatigue failures that can occur without warning. Front suspension components are particularly vulnerable due to the transverse engine layout creating unusual load paths.

    What to check: Walk around the car and visually inspect all four corners for any suspension components hanging loose or obviously displaced. Check for rust staining or fresh corrosion around suspension mounting points on the body shell. Look underneath for any components that appear bent, cracked, or separated ...

  2. Engine mount failure

    Wear item PG

    Engine mounting brackets show severe deterioration at The transverse engine layout places unusual stresses on the mounting system, particularly the torque reaction mount. Rubber components deteriorate rapidly and the mounting brackets themselves crack or corrode. This results in excessive engine movement that can damage adjacent components and create dangerous driving characteristics.

    What to check: Open the bonnet and visually inspect all visible engine mounts for cracking, separation, or obvious deterioration of rubber components. Look for oil contamination on rubber mounts which accelerates deterioration. Check for contact marks where the engine may be hitting surrounding components.

  3. Suspension joint and bush wear

    Wear item PG

    Suspension bushes and joints wear at 63.9 times the fleet average rate, with over 11,000 recorded MOT failures across all mileage bands. The PT Cruiser's suspension design uses numerous rubber bushes in the multi-link rear setup and MacPherson strut front system. Poor quality rubber compounds and inadequate sizing for the loads imposed result in rapid deterioration, particularly in rear suspension arms and anti-roll bar links.

    What to check: Jack up each corner safely and check for play in ball joints by grasping the wheel at 9 and 3 o'clock positions and attempting to rock it. Inspect rubber bushes in suspension arms for cracking, splitting, or obvious deterioration. Check anti-roll bar drop links for play by attempting to rotate th...

  4. Power steering system failure

    Wear item PG

    The 2.4-litre petrol variant shows power steering failures at 34 times the fleet average rate. The hydraulic power steering pump is undersized for the vehicle weight and steering loads, leading to premature seal failure and pump wear. High-pressure hoses also deteriorate, causing fluid leaks and system pressure loss. The steering becomes heavy and unresponsive, particularly during parking manoeuvres.

    What to check: Check the power steering fluid reservoir level and condition - look for foaming, discolouration, or contamination. Inspect the area around the power steering pump (left side of engine bay) for fluid leaks or staining. Check high-pressure hoses for swelling, cracking, or seepage. Look under the ca...

  5. Brake binding

    Safety and MOT risk PG

    Brake caliper seizure occurs at 24.7 times the fleet average, with over 2,400 MOT failures recorded. The brake calipers use slide pins that corrode and seize, causing the brake pads to remain partially applied. This creates constant friction, excessive heat buildup, rapid pad wear, and potential brake fade. The problem affects both front and rear calipers but is more common at the front due to higher braking loads.

    What to check: Check each wheel for excessive brake dust accumulation or uneven dust patterns between sides. Look at brake disc condition through the wheel spokes - blue discolouration or deep scoring indicates overheating from binding. Feel each wheel after a drive - significantly hotter wheels indicate bindin...

Pt Cruiser MOT results

30.9%

of Pt Cruiser MOT tests end in a fail, from 68,120 tests.

Most common reasons for failing

  1. Anti-roll bar links wornSuspension
  2. Engine mounting/bracket severely damaged or det...Bodywork
  3. Headlight faultLights & Electrics

Check the Pt Cruiser you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Pt Cruiser questions

Is the Chrysler Pt Cruiser reliable?

30.9% of Pt Cruiser models fail their MOT based on 68,120 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being suspension component catastrophic failure. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Chrysler Pt Cruiser?

The most serious known issues are suspension component catastrophic failure, engine mount failure, suspension joint and bush wear. Our car check flags whether a specific Pt Cruiser has been written off or had insurance claims linked to these faults.

How do I check if a Chrysler Pt Cruiser has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Chrysler Pt Cruiser has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Pt Cruiser has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Chrysler Pt Cruiser for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Chrysler Pt Cruiser fail its MOT on?

The most common MOT failure on the Pt Cruiser is anti-roll bar links worn. 30.9% of Pt Cruiser models fail overall, based on 68,120 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Pt Cruiser

Other Chrysler car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.