Home/Car check/Chrysler/300

Chrysler 300 car check

Find out if a Chrysler 300 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
25.7%3k tests
Known problems
5across LX
Full report
£7.49one-off, no subscription

Which 300 are you looking at?

Each 300 generation has its own weak spots. Here are the known problems.

  1. Front suspension ball joint wear

    Safety risk LX

    The front suspension ball joints show excessive wear at 7.9x the fleet average rate according to MOT data. These joints connect the steering knuckle to the control arms and their failure can cause sudden loss of steering control. The problem affects all mileage bands from 40,000 miles upward and appears to be getting worse over time, suggesting a design or material weakness.

    What to check: With the car on level ground, turn the steering wheel fully left and right while stationary - excessive play or clicking noises may indicate worn joints. Check for uneven tyre wear patterns on the front wheels, particularly on the inner or outer edges which can indicate suspension geometry problems.

  2. Wheel bearing failure

    Safety risk LX

    Wheel bearings fail at 7.9x the fleet average rate, particularly from 60,000 miles onwards. A failed wheel bearing can cause wheel wobble, steering pull, and in extreme cases, wheel detachment. The relatively heavy kerb weight of the 300 may accelerate bearing wear compared to lighter vehicles.

    What to check: Jack up each wheel individually and check for play by grasping the wheel at 12 and 6 o'clock positions and rocking it. Any movement indicates bearing wear. Spin each wheel by hand - it should rotate smoothly without roughness, grinding, or noise.

  3. Parking brake cable seizure and adjuster failure

    Safety and MOT risk LX

    The handbrake system uses cables and adjusters that are prone to corrosion and seizure, particularly in UK conditions. MOT data shows this model fails handbrake efficiency tests at up to 17.7x the national fleet average, with the problem worsening over time. The cables can seize partially or completely, leading to uneven braking or total handbrake failure. This is a persistent design weakness affecting the entire model generation.

    What to check: Apply the handbrake fully and count the clicks - it should engage within 8-10 clicks. More clicks indicate cable stretch or poor adjustment. Check the handbrake lever feels firm with no excessive travel to the end of its range. With the handbrake off, check both rear wheels spin freely by hand wi...

  4. Brake caliper binding and disc damage

    Safety and MOT risk LX

    MOT data shows brake binding at 5.0x fleet average and brake disc damage at 2.1x fleet average. The brake calipers are prone to seizure, causing constant brake pad contact with discs. This leads to overheating, warped or cracked discs, and premature brake component wear. The heavy weight of the 300 exacerbates brake system stress.

    What to check: Check all wheels spin freely by hand with no dragging or resistance. Look for blue discoloration on brake discs which indicates overheating from binding brakes. Check brake fluid level and colour - dark or contaminated fluid can contribute to caliper problems.

  5. Suspension component dust cover deterioration

    Wear item LX

    Suspension joint dust covers deteriorate at 6.8x the fleet average rate, typically affecting cars from 60,000 miles. While not immediately dangerous, deteriorated dust covers allow water and dirt ingress into suspension joints, accelerating wear and leading to eventual joint failure.

    What to check: Visually inspect suspension components under the car looking for torn, split, or missing rubber dust covers on ball joints and track rod ends. Check for grease leakage around suspension joints which indicates damaged seals.

300 MOT results

25.7%

of 300 MOT tests end in a fail, from 3,409 tests.

Most common reasons for failing

  1. Parking brake efficiency less than 50% of the r...Brakes
  2. Parking brake inoperative on one sideBrakes
  3. Subframe bushes or mounts wornSuspension

Check the 300 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

300 questions

Is the Chrysler 300 reliable?

25.7% of 300 models fail their MOT based on 3,409 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being front suspension ball joint wear. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Chrysler 300?

The most serious known issues are front suspension ball joint wear, wheel bearing failure, parking brake cable seizure and adjuster failure. Our car check flags whether a specific 300 has been written off or had insurance claims linked to these faults.

How do I check if a Chrysler 300 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Chrysler 300 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N 300 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Chrysler 300 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Chrysler 300 fail its MOT on?

The most common MOT failure on the 300 is parking brake efficiency less than 50% of the r.... 25.7% of 300 models fail overall, based on 3,409 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the 300

Other Chrysler car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.