Home/Car check/Chrysler/Crossfire

Chrysler Crossfire car check

Find out if a Crossfire has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
22.3%16k tests
Known problems
5across ZH
Full report
£7.49one-off, no subscription

Which Crossfire are you looking at?

Each Crossfire generation has its own weak spots. Here are the known problems.

  1. Excessive steering play and rack wear

    Safety risk ZH

    The Crossfire steering rack develops excessive play and internal wear at higher mileages, causing dangerous steering response delays and wandering at motorway speeds. MOT data shows this model fails steering play tests at 92.6 times the fleet average, indicating a systematic design weakness. The rack uses hydraulic assistance and shares components with Mercedes SLK platform, but the Crossfire's weight distribution places additional stress on the steering system. This is a critical safety defect that requires immediate attention.

    What to check: With the front wheels straight, grip the steering wheel at 9 and 3 o'clock positions and attempt to rock it left and right without turning. More than 13mm (half inch) of movement at the wheel rim before the front wheels begin to turn indicates excessive play. Check the steering rack gaiter boots ...

  2. Wheel bearing failure

    Safety risk ZH

    Crossfire wheel bearings fail at 30.4 times the fleet average rate according to MOT data, with over 1,600 documented failures across all mileage bands. The bearings appear undersized for the vehicle weight and performance characteristics, leading to premature wear and potential catastrophic failure. This affects both front and rear bearings, with front bearings typically failing first due to steering loads and braking forces.

    What to check: Jack up each corner of the car safely and grip the wheel at 12 and 6 o'clock positions. Rock the wheel vertically - any movement indicates bearing wear. Grip the wheel at 3 and 9 o'clock and rock horizontally - movement here may indicate bearing wear or suspension joint problems. Spin each wheel ...

  3. Brake hose deterioration and failure

    Safety risk ZH

    Crossfire flexible brake hoses deteriorate at 21.7 times the fleet average rate, with over 800 MOT failures recorded. The hoses appear prone to cracking, bulging, and internal collapse, particularly where they flex during suspension movement. This affects both front and rear brake circuits and can result in complete brake system failure. The problem appears age-related as well as mileage-dependent, affecting cars across all service histories.

    What to check: Inspect all flexible brake hoses visually, looking for cracks, bulges, chafing, or oil contamination on the rubber outer covering. Pay particular attention to areas where hoses move with suspension travel. Check brake fluid level in the master cylinder reservoir - low fluid may indicate external ...

  4. Suspension component wear and corrosion

    Wear item ZH

    The Crossfire suspension system shows premature wear of bushes, joints, and structural components, with MOT failures at 17.4 times the fleet average for worn components and 14.6 times average for corroded components. This affects control arm bushes, anti-roll bar links, and subframe mounts. The combination of sports car usage patterns and UK road conditions accelerates wear, particularly in the rear multi-link suspension which uses numerous rubber components.

    What to check: Inspect visible suspension components for cracked or split rubber bushes, particularly on control arms and anti-roll bar links. Look for rust or corrosion on suspension mounting points and subframe areas. Check for oil or grease leakage from shock absorber bodies. Examine tyre wear patterns - une...

  5. Engine and transmission fluid leaks

    Engine damage risk ZH

    The Crossfire V6 engine develops oil leaks from various seals and gaskets as it ages, with MOT data showing fluid leaks at Common leak points include the valve cover gaskets, oil pan gasket, and transmission seals. While often not immediately dangerous, these leaks can progress to significant oil loss and environmental hazard levels. The Mercedes-sourced V6 is known for gradual seal deterioration, particularly in the UK climate.

    What to check: Check engine oil level on the dipstick - frequent top-ups indicate consumption or leakage. Inspect the ground under the car after overnight parking for oil stains or puddles. Look under the bonnet for oil staining on the engine block, particularly around the valve covers and oil pan areas. Check ...

Crossfire MOT results

22.3%

of Crossfire MOT tests end in a fail, from 16,320 tests.

Most common reasons for failing

  1. Track rod ends wornSteering
  2. Free play in the steering, measured at the rim ...Steering
  3. Transmission shaft bearing wornBodywork

Check the Crossfire you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Crossfire questions

Is the Chrysler Crossfire reliable?

22.3% of Crossfire models fail their MOT based on 16,320 tests analysed. That’s about average for the class. There are 5 known problems to watch for, the most serious being excessive steering play and rack wear. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Chrysler Crossfire?

The most serious known issues are excessive steering play and rack wear, wheel bearing failure, brake hose deterioration and failure. Our car check flags whether a specific Crossfire has been written off or had insurance claims linked to these faults.

How do I check if a Chrysler Crossfire has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Chrysler Crossfire has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Crossfire has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Chrysler Crossfire for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Chrysler Crossfire fail its MOT on?

The most common MOT failure on the Crossfire is track rod ends worn. 22.3% of Crossfire models fail overall, based on 16,320 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Crossfire

Other Chrysler car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.