Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2018 Vauxhall Mokka Petrol 1364cc has had 7 MOT tests on record, passing 6 and failing once (86% pass rate). It has 43,833 miles on the clock, averaging 3,690 miles per year, well below the UK average of 7,400.
MOT & Mileage History for SG18 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failure recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Low mileage| Latest reading | 43,833 miles |
| Reading date | |
| Miles last year | 4,378 |
| Average per year | 3,690 |
| Mileage consistency | Consistent |
Check SG18 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 7 tests on record
Explore more about the Vauxhall Mokka
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | SG18 CNC |
| Make | Vauxhall |
| Model | Mokka |
| Colour | Blue |
| Fuel type | Petrol |
| Engine | 1364cc |
| Year | 2018 |
| First registered | |
| Area code | SG — Glasgow, Scotland |
| Age identifier | 18 — March 2018 to August 2018 |
More SG18 C plates
Browse all SG18 C registrations from Glasgow.
About SG18 CNC
What car is SG18 CNC?
SG18 CNC is an blue Vauxhall Mokka, petrol (1364cc). First registered in Glasgow in 2018.
What is the mileage of SG18 CNC?
The last recorded mileage for SG18 CNC was 43,833 miles, recorded on 6 May 2026 during its most recent MOT test.
Has SG18 CNC passed its MOT?
SG18 CNC has had 7 MOT tests with an 86% pass rate (6 passes, 1 failure). It last passed on 6 May 2026.
Is SG18 CNC ULEZ compliant?
Based on its fuel type and registration year, SG18 CNC is likely ULEZ compliant. Petrol post-2005 (Euro 4). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is SG18 CNC?
SG18 CNC is approximately 8 years old. Age identifier 18 means registered between 1 March 2018 and 31 August 2018.