Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2016 Fiat Roller Team Diesel 2287cc has had 9 MOT tests on record, passing 8 and failing once (89% pass rate). It has 29,478 miles on the clock, averaging 1,880 miles per year, well below the UK average of 7,400.
MOT & Mileage History for HF65 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failure recorded
Average miles/year
Gap in MOT history
Mileage Analysis
Low mileage| Latest reading | 29,478 miles |
| Reading date | |
| Miles last year | 534 |
| Average per year | 1,880 |
| Mileage consistency | Variable |
Check HF65 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 9 tests on record
Explore more about the Fiat Roller Team
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | HF65 CNC |
| Make | Fiat |
| Model | Roller Team |
| Colour | White |
| Fuel type | Diesel |
| Engine | 2287cc |
| Year | 2016 |
| First registered | |
| Area code | HF — Bournemouth, Hampshire and Dorset |
| Age identifier | 65 — September 2015 to February 2016 |
More HF65 C plates
Browse all HF65 C registrations from Bournemouth.
About HF65 CNC
What car is HF65 CNC?
HF65 CNC is an white Fiat Roller Team, diesel (2287cc). First registered in Bournemouth in 2016.
What is the mileage of HF65 CNC?
The last recorded mileage for HF65 CNC was 29,478 miles, recorded on 19 Feb 2026 during its most recent MOT test.
Has HF65 CNC passed its MOT?
HF65 CNC has had 9 MOT tests with an 89% pass rate (8 passes, 1 failure). It last passed on 19 Feb 2026.
Is HF65 CNC ULEZ compliant?
Based on its fuel type and registration year, HF65 CNC is likely ULEZ compliant. Diesel post-2015 (Euro 6). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is HF65 CNC?
HF65 CNC is approximately 10 years old. Age identifier 65 means registered between 1 September 2015 and 28 February 2016.