Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2020 Tesla Model 3 Performance Awd Electric has had 4 MOT tests on record, passing 3 and failing once (75% pass rate). It has 32,638 miles on the clock, averaging 5,237 miles per year, below the UK average of 7,400.
MOT & Mileage History for GD70 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failure recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Below average| Latest reading | 32,638 miles |
| Reading date | |
| Miles last year | 5,444 |
| Average per year | 5,237 |
| Mileage consistency | Consistent |
Check GD70 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 4 tests on record
Explore more about the Tesla Model 3 Performance Awd
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | GD70 CNC |
| Make | Tesla |
| Model | Model 3 Performance Awd |
| Colour | Grey |
| Fuel type | Electric |
| Year | 2020 |
| First registered | |
| Area code | GD — Maidstone, Garden of England |
| Age identifier | 70 — September 2020 to February 2021 |
More GD70 C plates
Browse all GD70 C registrations from Maidstone.
About GD70 CNC
What car is GD70 CNC?
GD70 CNC is a grey Tesla Model 3 Performance Awd, electric. First registered in Maidstone in 2020.
What is the mileage of GD70 CNC?
The last recorded mileage for GD70 CNC was 32,638 miles, recorded on 23 Dec 2025 during its most recent MOT test.
Has GD70 CNC passed its MOT?
GD70 CNC has had 4 MOT tests with a 75% pass rate (3 passes, 1 failure). It last passed on 23 Dec 2025.
Is GD70 CNC ULEZ compliant?
Based on its fuel type and registration year, GD70 CNC is likely ULEZ compliant. Electric — exempt. This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is GD70 CNC?
GD70 CNC is approximately 6 years old. Age identifier 70 means registered between 1 September 2020 and 28 February 2021.