Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2015 Mini One Petrol 1198cc has had 9 MOT tests on record, passing 8 and failing once (89% pass rate). It has 57,757 miles on the clock, averaging 4,427 miles per year, well below the UK average of 7,400. The 1.2 Petrol engine is known for b38a12a and timing chain stretch/failure.
MOT & Mileage History for EK65 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failure recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Low mileage| Latest reading | 57,757 miles |
| Reading date | |
| Miles last year | 2,574 |
| Average per year | 4,427 |
| Mileage consistency | Variable |
Check EK65 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 9 tests on record
Reported issues for this Mini One
These are the most commonly reported problems on Mini One models (2014–2024), based on owner reports and workshop data across the UK.
B38A12A
Timing Chain Stretch/Failure
Chain stretches prematurely, potentially snapping guides; similar to B47 diesel sibling.
Explore more about the Mini One
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | EK65 CNC |
| Make | Mini |
| Model | One |
| Colour | White |
| Fuel type | Petrol |
| Engine | 1198cc |
| Year | 2015 |
| First registered | |
| Area code | EK — Chelmsford, Essex |
| Age identifier | 65 — September 2015 to February 2016 |
More EK65 C plates
Browse all EK65 C registrations from Chelmsford.
About EK65 CNC
What car is EK65 CNC?
EK65 CNC is an white Mini One, petrol (1198cc). First registered in Chelmsford in 2015.
What is the mileage of EK65 CNC?
The last recorded mileage for EK65 CNC was 57,757 miles, recorded on 29 Oct 2025 during its most recent MOT test.
Has EK65 CNC passed its MOT?
EK65 CNC has had 9 MOT tests with an 89% pass rate (8 passes, 1 failure). It last passed on 29 Oct 2025.
Is EK65 CNC ULEZ compliant?
Based on its fuel type and registration year, EK65 CNC is likely ULEZ compliant. Petrol post-2005 (Euro 4). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is EK65 CNC?
EK65 CNC is approximately 11 years old. Age identifier 65 means registered between 1 September 2015 and 28 February 2016.