Vehicle summary
ULEZ status is estimated based on fuel type and registration year. It may not reflect the actual emission standard of this vehicle. Check with TfL for a definitive answer.
At a glance
This 2019 Audi Q2 Diesel 1598cc has had 4 MOT tests on record, passing every one. It has 40,775 miles on the clock, averaging 6,567 miles per year, below the UK average of 7,400.
MOT & Mileage History for DG69 CNC
Data from DVSA. Last updated August 2026. Check gov.uk for the latest.
MOT failures recorded
Average miles/year
Gaps in MOT history
Mileage Analysis
Below average| Latest reading | 40,775 miles |
| Reading date | |
| Miles last year | 6,222 |
| Average per year | 6,567 |
| Mileage consistency | Consistent |
Check DG69 CNC
- Write-off & insurance claims Experian
- Outstanding finance check Experian
- Stolen vehicle check Experian
- Ownership changes Experian
- Mileage discrepancy alerts
- Plate & colour change history
- Franchised dealer records
- Independent garage visits
- Service interval analysis
- Warranty work logged
Full MOT Test History 4 tests on record
Explore more about the Audi Q2
Thinking about buying this car? These resources will help you make an informed decision.
Vehicle Details
| Registration | DG69 CNC |
| Make | Audi |
| Model | Q2 |
| Colour | Red |
| Fuel type | Diesel |
| Engine | 1598cc |
| Year | 2019 |
| First registered | |
| Area code | DG — Chester, Deeside to Shrewsbury |
| Age identifier | 69 — September 2019 to February 2020 |
More DG69 C plates
Browse all DG69 C registrations from Chester.
About DG69 CNC
What car is DG69 CNC?
DG69 CNC is a red Audi Q2, diesel (1598cc). First registered in Chester in 2019.
What is the mileage of DG69 CNC?
The last recorded mileage for DG69 CNC was 40,775 miles, recorded on 25 Sep 2025 during its most recent MOT test.
Has DG69 CNC passed its MOT?
DG69 CNC has had 4 MOT tests with an 100% pass rate (4 passes, 0 failures). It last passed on 25 Sep 2025.
Is DG69 CNC ULEZ compliant?
Based on its fuel type and registration year, DG69 CNC is likely ULEZ compliant. Diesel post-2015 (Euro 6). This is an estimate based on typical emission standards — confirm with TfL's ULEZ checker for a definitive answer.
How old is DG69 CNC?
DG69 CNC is approximately 7 years old. Age identifier 69 means registered between 1 September 2019 and 28 February 2020.