Toyota Vellfire MOT Failures
An analysis of 2,596 real DVSA MOT tests on the Toyota Vellfire — what fails, how often, and how that compares to every other car on UK roads.
Where the Toyota Vellfire fails its MOT
The single biggest MOT failure point on the Toyota Vellfire is axle or kingpin wear — this model is 20 times more likely to fail on this item than the average car on UK roads. That makes it a significant weak point for anyone buying or owning this model. Across 2,596 MOT tests, 13.76% of all Toyota Vellfire tests recorded this as a failure.
Suspension failures typically mean worn bushes, drop links, or dampers. These affect handling and tyre wear. Budget £150–£400 per corner at an independent garage for full suspension overhaul.
Other notable weak points include anti-roll bar links worn (25x the fleet average), front or rear fog lamp switch inoperative or no... (1375x the fleet average), and obligatory rear fog lamp missing, or a front or... (152x the fleet average). These ratios compare the Toyota Vellfire's failure rate on each item against the national average for all cars tested — a ratio of 10x means this model fails ten times more often than a typical car.
The failures span 2 categories: Suspension, Lights & Electrics. If you're inspecting a Toyota Vellfire before purchase, these are the areas to focus on — and if any have been flagged as advisories on a previous MOT, they're likely to become failures in the near future.
How failures change with mileage
The Toyota Vellfire's weak points shift as the car covers more miles. Understanding these patterns helps you know what to expect — and what to budget for — at each stage of ownership.
Under 60,000 miles
At this mileage, most failures are either design-related or caused by age rather than wear. Components like bushes and drop links may not have been replaced yet, and original-fit parts can deteriorate even on low-mileage cars that spend a lot of time sitting.
For the Toyota Vellfire specifically, the DVSA data shows the most common failures at this mileage are anti-roll bar links worn (25x the average) and axle or kingpin wear (20x).
60,000 to 100,000 miles
This is where routine wear items start to show up. Brake components, tyres, and exhaust parts have done serious work by this point. Cars that have been well serviced will show fewer of these failures — this mileage band is where good maintenance really separates the well-kept from the neglected.
For the Toyota Vellfire specifically, the DVSA data shows the most common failures at this mileage are front or rear fog lamp switch inoperative or no... (1375x the average) and obligatory rear fog lamp missing, or a front or... (152x). axle or kingpin wear (19x) and anti-roll bar links worn (16x) also appear frequently.
The shift from anti-roll bar links worn at lower mileages to front or rear fog lamp switch inoperative or no... at higher mileages is typical — early failures tend to be design or factory-related, while high-mileage failures reflect accumulated mechanical wear. A car that's been well maintained will usually dodge the worst of both.
What to check before buying a Toyota Vellfire
Based on the MOT failure data and known issues above, here's what to prioritise when inspecting a Toyota Vellfire:
Suspension — check for axle or kingpin wear, anti-roll bar links worn. Lights & Electrics — check for front or rear fog lamp switch inoperative or no..., obligatory rear fog lamp missing, or a front or....
Always check the car's full MOT history for patterns — recurring advisories often become failures within 12 months. Enter any reg into our free car check to see the complete picture.
Looking at a specific Toyota Vellfire?
Enter the reg to see its full MOT history, mileage records, write-off status, and finance checks.
Toyota Vellfire MOT FAQs
What are the most common MOT failures on a Toyota Vellfire?
Based on 2,596 DVSA MOT tests, the most common failure is axle or kingpin wear — at 20x the national fleet average. Other frequent failures include anti-roll bar links worn and front or rear fog lamp switch inoperative or no....
Is the Toyota Vellfire reliable based on MOT data?
The Toyota Vellfire has 4 categories where it fails more often than average. The main concern is axle or kingpin wear. Always check a specific car's full history before buying.
What MOT failures should I expect at high mileage?
The most common high-mileage failures include axle or kingpin wear, anti-roll bar links worn, front or rear fog lamp switch inoperative or no....
How do I check a Toyota Vellfire's MOT history?
Enter the registration number into our free car check above. You'll see every MOT test result, advisories and failures, mileage readings, write-off status, and finance checks.
MOT failure data sourced from DVSA bulk test records via data.gov.uk. Ratios compare this model's failure rate against the national fleet average. Known issues sourced from manufacturer bulletins, specialist workshops, and verified owner reports.