Toyota Granvia MOT Failures
An analysis of 8,722 real DVSA MOT tests on the Toyota Granvia — what fails, how often, and how that compares to every other car on UK roads. Generations covered: KCH10 (1995–2019).
Where the Toyota Granvia fails its MOT
The single biggest MOT failure point on the Toyota Granvia is anti-roll bar links worn — this model is 11 times more likely to fail on this item than the average car on UK roads. That makes it worth watching for anyone buying or owning this model. Across 8,722 MOT tests, 13.15% of all Toyota Granvia tests recorded this as a failure.
Suspension failures typically mean worn bushes, drop links, or dampers. These affect handling and tyre wear. Budget £150–£400 per corner at an independent garage for full suspension overhaul.
Other notable weak points include obligatory rear fog lamp missing, or a front or... (10x the fleet average), wheel bearings worn (7.4x the fleet average), structural corrosion (6.8x the fleet average), and brake hoses perished or damaged (6.0x the fleet average). These ratios compare the Toyota Granvia's failure rate on each item against the national average for all cars tested — a ratio of 10x means this model fails ten times more often than a typical car.
The failures span 4 categories: Suspension, Lights & Electrics, Bodywork, Brakes. If you're inspecting a Toyota Granvia before purchase, these are the areas to focus on — and if any have been flagged as advisories on a previous MOT, they're likely to become failures in the near future.
Known issues beyond the MOT
An MOT only tests roadworthiness at a single point in time — it won't catch developing faults, intermittent problems, or issues that haven't yet reached the failure threshold. These are the issues that Toyota Granvia specialists and owners flag most frequently, drawn from manufacturer technical bulletins, workshop data, and verified owner reports.
Structural corrosion around suspension mounting points Dangerous
MOT data shows structural corrosion failures at 5.0x the fleet average, specifically affecting load-bearing areas within 30cm of suspension mounting points. Affects KCH10; typical independent garage repair cost is £1,500–£3,000.
Suspension bush deterioration Major
MOT data shows suspension bush failures at 11.2x the fleet average on 3.0L diesel variants. Affects KCH10; typical independent garage repair cost is £300–£800.
Wheel bearing failure Major
MOT data shows wheel bearing failures at 7.4x the fleet average on 3.0L diesel variants. Affects KCH10; typical independent garage repair cost is £200–£400.
Brake hose deterioration Major
MOT data shows flexible brake hose failures at 3.8x the fleet average, with brake hose ferrule corrosion at 2.5x the fleet average on high-mileage 3.0L diesel variants. Affects KCH10; typical independent garage repair cost is £150–£300.
For the complete picture — including repair costs across independent, specialist, and dealer garages — see the full Toyota Granvia common problems breakdown.
What to check before buying a Toyota Granvia
Based on the MOT failure data and known issues above, here's what to prioritise when inspecting a Toyota Granvia:
Suspension — check for anti-roll bar links worn, wheel bearings worn, abs fault, coil springs broken. Lights & Electrics — check for obligatory rear fog lamp missing, or a front or..., stop lamp with a multiple light source up to 1/.... Bodywork — check for structural corrosion.
Beyond the MOT items, ask specifically about structural corrosion around suspension mounting points and suspension bush deterioration. These won't show up on a standard MOT but can be expensive to fix — repairs start from £1,500. A specialist pre-purchase inspection is worth the investment on this model.
Always check the car's full MOT history for patterns — recurring advisories often become failures within 12 months. And verify the service history to confirm maintenance has been kept up to schedule. Enter any reg into our free car check to see the complete picture.
Looking at a specific Toyota Granvia?
Enter the reg to see its full MOT history, mileage records, write-off status, and finance checks.
Toyota Granvia MOT FAQs
What are the most common MOT failures on a Toyota Granvia?
Based on 8,722 DVSA MOT tests, the most common failure is anti-roll bar links worn — at 11x the national fleet average. Other frequent failures include obligatory rear fog lamp missing, or a front or... and wheel bearings worn.
Is the Toyota Granvia reliable based on MOT data?
The Toyota Granvia has 8 MOT failure categories above the fleet average. Specialists also flag structural corrosion around suspension mounting points as a concern. A pre-purchase inspection and service history check are recommended.
What MOT failures should I expect at high mileage?
Above 100,000 miles, the Toyota Granvia most commonly fails on stop lamp with a multiple light source up to 1/... and anti-roll bar links worn. Under 60,000 miles, the main issues are .
How do I check a Toyota Granvia's MOT history?
Enter the registration number into our free car check above. You'll see every MOT test result, advisories and failures, mileage readings, write-off status, and finance checks.
MOT failure data sourced from DVSA bulk test records via data.gov.uk. Ratios compare this model's failure rate against the national fleet average. Known issues sourced from manufacturer bulletins, specialist workshops, and verified owner reports.