Hyundai Atoz + MOT Failures
An analysis of 3,339 real DVSA MOT tests on the Hyundai Atoz + — what fails, how often, and how that compares to every other car on UK roads.
Where the Hyundai Atoz + fails its MOT
The single biggest MOT failure point on the Hyundai Atoz + is wheel bearings worn — this model is 39 times more likely to fail on this item than the average car on UK roads. That makes it a significant weak point for anyone buying or owning this model. Across 3,339 MOT tests, 18% of all Hyundai Atoz + tests recorded this as a failure.
Suspension failures typically mean worn bushes, drop links, or dampers. These affect handling and tyre wear. Budget £150–£400 per corner at an independent garage for full suspension overhaul.
Other notable weak points include brakes imbalance across an axle (26x the fleet average), transmission shaft constant velocity joint boot... (21x the fleet average), headlight fault (19x the fleet average), and abs fault (12x the fleet average). These ratios compare the Hyundai Atoz +'s failure rate on each item against the national average for all cars tested — a ratio of 10x means this model fails ten times more often than a typical car.
The failures span 4 categories: Suspension, Brakes, Bodywork, Lights & Electrics. If you're inspecting a Hyundai Atoz + before purchase, these are the areas to focus on — and if any have been flagged as advisories on a previous MOT, they're likely to become failures in the near future.
How failures change with mileage
The Hyundai Atoz +'s weak points shift as the car covers more miles. Understanding these patterns helps you know what to expect — and what to budget for — at each stage of ownership.
Under 60,000 miles
At this mileage, most failures are either design-related or caused by age rather than wear. Components like bushes and drop links may not have been replaced yet, and original-fit parts can deteriorate even on low-mileage cars that spend a lot of time sitting.
For the Hyundai Atoz + specifically, the DVSA data shows the most common failures at this mileage are wheel bearings worn (39x the average) and brakes imbalance across an axle (26x). transmission shaft constant velocity joint boot... (21x) and headlight fault (19x) also appear frequently.
60,000 to 100,000 miles
This is where routine wear items start to show up. Brake components, tyres, and exhaust parts have done serious work by this point. Cars that have been well serviced will show fewer of these failures — this mileage band is where good maintenance really separates the well-kept from the neglected.
For the Hyundai Atoz + specifically, the DVSA data shows the most common failures at this mileage are brakes imbalance across an axle (23x the average) and wheel bearings worn (16x). headlight fault (16x) and abs fault (8.3x) also appear frequently.
The shift from wheel bearings worn at lower mileages to brakes imbalance across an axle at higher mileages is typical — early failures tend to be design or factory-related, while high-mileage failures reflect accumulated mechanical wear. A car that's been well maintained will usually dodge the worst of both.
Found a Hyundai Atoz + you like?
Check its dealer service history before you commit.
£6.99 · Full refund if no records found
What to check before buying a Hyundai Atoz +
Based on the MOT failure data and known issues above, here's what to prioritise when inspecting a Hyundai Atoz +:
Suspension — check for wheel bearings worn, abs fault. Brakes — check for brakes imbalance across an axle, brake pipes corroded. Bodywork — check for transmission shaft constant velocity joint boot.... Lights & Electrics — check for headlight fault.
Always check the car's full MOT history for patterns — recurring advisories often become failures within 12 months. And verify the service history to confirm maintenance has been kept up to schedule. Enter any reg into our free car check to see the complete picture.
Check this Hyundai Atoz +'s service history
See every franchised dealer visit, dates, mileage readings, and work done. Know whether the maintenance that prevents these MOT failures was actually done.
£6.99 · Full refund if no records found
Hyundai Atoz + MOT FAQs
What are the most common MOT failures on a Hyundai Atoz +?
Based on 3,339 DVSA MOT tests, the most common failure is wheel bearings worn — at 39x the national fleet average. Other frequent failures include brakes imbalance across an axle and transmission shaft constant velocity joint boot....
Is the Hyundai Atoz + reliable based on MOT data?
The Hyundai Atoz + has 6 categories where it fails more often than average. The main concern is wheel bearings worn. Always check a specific car's full history before buying.
What MOT failures should I expect at high mileage?
The most common high-mileage failures include wheel bearings worn, brakes imbalance across an axle, transmission shaft constant velocity joint boot....
How do I check a Hyundai Atoz +'s MOT history?
Enter the registration number into our free car check above. You'll see every MOT test result, advisories and failures, mileage readings, write-off status, and finance checks.
MOT failure data sourced from DVSA bulk test records via data.gov.uk. Ratios compare this model's failure rate against the national fleet average. Known issues sourced from manufacturer bulletins, specialist workshops, and verified owner reports.