Great Wall Steed Se Td 4x4 MOT Failures
An analysis of 7,816 real DVSA MOT tests on the Great Wall Steed Se Td 4x4 — what fails, how often, and how that compares to every other car on UK roads.
Where the Great Wall Steed Se Td 4x4 fails its MOT
The single biggest MOT failure point on the Great Wall Steed Se Td 4x4 is coil springs broken — this model is 798 times more likely to fail on this item than the average car on UK roads. That makes it an extreme outlier for anyone buying or owning this model. Across 7,816 MOT tests, 16.53% of all Great Wall Steed Se Td 4x4 tests recorded this as a failure.
Suspension failures typically mean worn bushes, drop links, or dampers. These affect handling and tyre wear. Budget £150–£400 per corner at an independent garage for full suspension overhaul.
Other notable weak points include headlight fault (24x the fleet average), parking brake inoperative on one side (22x the fleet average), transmission shaft bearing worn (498x the fleet average), and transmission joint, belt or chain worn (317x the fleet average). These ratios compare the Great Wall Steed Se Td 4x4's failure rate on each item against the national average for all cars tested — a ratio of 10x means this model fails ten times more often than a typical car.
The failures span 4 categories: Suspension, Lights & Electrics, Brakes, Bodywork. If you're inspecting a Great Wall Steed Se Td 4x4 before purchase, these are the areas to focus on — and if any have been flagged as advisories on a previous MOT, they're likely to become failures in the near future.
How failures change with mileage
The Great Wall Steed Se Td 4x4's weak points shift as the car covers more miles. Understanding these patterns helps you know what to expect — and what to budget for — at each stage of ownership.
Under 60,000 miles
At this mileage, most failures are either design-related or caused by age rather than wear. Components like bushes and drop links may not have been replaced yet, and original-fit parts can deteriorate even on low-mileage cars that spend a lot of time sitting.
For the Great Wall Steed Se Td 4x4 specifically, the DVSA data shows the most common failures at this mileage are coil springs broken (798x the average) and transmission shaft bearing worn (498x). wheel with a loose or missing wheel nut, bolt o... (47x) and headlight fault (24x) also appear frequently.
60,000 to 100,000 miles
This is where routine wear items start to show up. Brake components, tyres, and exhaust parts have done serious work by this point. Cars that have been well serviced will show fewer of these failures — this mileage band is where good maintenance really separates the well-kept from the neglected.
For the Great Wall Steed Se Td 4x4 specifically, the DVSA data shows the most common failures at this mileage are coil springs broken (430x the average) and transmission joint, belt or chain worn (317x). transmission shaft bearing worn (113x) and suspension pin, bush or joint worn (31x) also appear frequently.
Over 100,000 miles
High-mileage cars accumulate failures across multiple systems. The key question isn't whether things will need doing — they will — but whether the car has been maintained well enough to keep on top of them. Look for a consistent service history and recent MOT passes with minimal advisories.
For the Great Wall Steed Se Td 4x4 specifically, the DVSA data shows the most common failures at this mileage are coil springs broken (179x the average) and structural corrosion (18x). vehicle structure corroded to the extent that t... (14x) and headlight fault (9.7x) also appear frequently.
Found a Great Wall Steed Se Td 4x4 you like?
Check its dealer service history before you commit.
£6.99 · Full refund if no records found
What to check before buying a Great Wall Steed Se Td 4x4
Based on the MOT failure data and known issues above, here's what to prioritise when inspecting a Great Wall Steed Se Td 4x4:
Suspension — check for coil springs broken, suspension pin, bush or joint worn, wheel bearings worn. Lights & Electrics — check for headlight fault. Brakes — check for parking brake inoperative on one side. Bodywork — check for transmission shaft bearing worn, transmission joint, belt or chain worn, vehicle structure corroded to the extent that t....
Always check the car's full MOT history for patterns — recurring advisories often become failures within 12 months. Enter any reg into our free car check to see the complete picture.
Check this Great Wall Steed Se Td 4x4's service history
See every franchised dealer visit, dates, mileage readings, and work done. Know whether the maintenance that prevents these MOT failures was actually done.
£6.99 · Full refund if no records found
Great Wall Steed Se Td 4x4 MOT FAQs
What are the most common MOT failures on a Great Wall Steed Se Td 4x4?
Based on 7,816 DVSA MOT tests, the most common failure is coil springs broken — at 798x the national fleet average. Other frequent failures include headlight fault and parking brake inoperative on one side.
Is the Great Wall Steed Se Td 4x4 reliable based on MOT data?
The Great Wall Steed Se Td 4x4 has 12 categories where it fails more often than average. The main concern is coil springs broken. Always check a specific car's full history before buying.
What MOT failures should I expect at high mileage?
Above 100,000 miles, the Great Wall Steed Se Td 4x4 most commonly fails on coil springs broken and structural corrosion. Under 60,000 miles, the main issues are coil springs broken and transmission shaft bearing worn.
How do I check a Great Wall Steed Se Td 4x4's MOT history?
Enter the registration number into our free car check above. You'll see every MOT test result, advisories and failures, mileage readings, write-off status, and finance checks.
MOT failure data sourced from DVSA bulk test records via data.gov.uk. Ratios compare this model's failure rate against the national fleet average. Known issues sourced from manufacturer bulletins, specialist workshops, and verified owner reports.