BMW 730 MOT Failures
An analysis of 82,470 real DVSA MOT tests on the BMW 730 — what fails, how often, and how that compares to every other car on UK roads.
Where the BMW 730 fails its MOT
The single biggest MOT failure point on the BMW 730 is any fracture or welding defect on a wheel — this model is 93 times more likely to fail on this item than the average car on UK roads. That makes it a major concern for anyone buying or owning this model. Across 82,470 MOT tests, 0.55% of all BMW 730 tests recorded this as a failure.
Wheel-related failures include cracked alloys, damaged wheel studs, and bearing play. Listen for rumbling at speed (wheel bearings) and check for any visible cracks around alloy spokes.
Other notable weak points include transmission shaft flexible coupling deteriorated (40x the fleet average), parking brake inefficient (15x the fleet average), window tint too dark (16x the fleet average), and headlight fault (12x the fleet average). These ratios compare the BMW 730's failure rate on each item against the national average for all cars tested — a ratio of 10x means this model fails ten times more often than a typical car.
The failures span 5 categories: Wheels, Bodywork, Brakes, Wipers & Windscreen, Lights & Electrics. If you're inspecting a BMW 730 before purchase, these are the areas to focus on — and if any have been flagged as advisories on a previous MOT, they're likely to become failures in the near future.
How failures change with mileage
The BMW 730's weak points shift as the car covers more miles. Understanding these patterns helps you know what to expect — and what to budget for — at each stage of ownership.
Under 60,000 miles
At this mileage, most failures are either design-related or caused by age rather than wear. Components like bushes and drop links may not have been replaced yet, and original-fit parts can deteriorate even on low-mileage cars that spend a lot of time sitting.
For the BMW 730 specifically, the DVSA data shows the most common failures at this mileage are transmission shaft flexible coupling deteriorated (40x the average) and any fracture or welding defect on a wheel (19x).
60,000 to 100,000 miles
This is where routine wear items start to show up. Brake components, tyres, and exhaust parts have done serious work by this point. Cars that have been well serviced will show fewer of these failures — this mileage band is where good maintenance really separates the well-kept from the neglected.
For the BMW 730 specifically, the DVSA data shows the most common failures at this mileage are transmission shaft flexible coupling deteriorated (37x the average) and any fracture or welding defect on a wheel (31x). window tint too dark (16x) and window tint too dark also appear frequently.
Over 100,000 miles
High-mileage cars accumulate failures across multiple systems. The key question isn't whether things will need doing — they will — but whether the car has been maintained well enough to keep on top of them. Look for a consistent service history and recent MOT passes with minimal advisories.
For the BMW 730 specifically, the DVSA data shows the most common failures at this mileage are any fracture or welding defect on a wheel (93x the average) and transmission shaft flexible coupling deteriorated (14x). parking brake inefficient (13x) and headlight fault (12x) also appear frequently.
The shift from transmission shaft flexible coupling deteriorated at lower mileages to any fracture or welding defect on a wheel at higher mileages is typical — early failures tend to be design or factory-related, while high-mileage failures reflect accumulated mechanical wear. A car that's been well maintained will usually dodge the worst of both.
What to check before buying a BMW 730
Based on the MOT failure data and known issues above, here's what to prioritise when inspecting a BMW 730:
Wheels — check for any fracture or welding defect on a wheel. Bodywork — check for transmission shaft flexible coupling deteriorated. Brakes — check for parking brake inefficient, brake hoses perished or damaged. Wipers & Windscreen — check for window tint too dark.
Always check the car's full MOT history for patterns — recurring advisories often become failures within 12 months. Enter any reg into our free car check to see the complete picture.
Looking at a specific BMW 730?
Enter the reg to see its full MOT history, mileage records, write-off status, and finance checks.
BMW 730 MOT FAQs
What are the most common MOT failures on a BMW 730?
Based on 82,470 DVSA MOT tests, the most common failure is any fracture or welding defect on a wheel — at 93x the national fleet average. Other frequent failures include transmission shaft flexible coupling deteriorated and parking brake inefficient.
Is the BMW 730 reliable based on MOT data?
The BMW 730 has 6 categories where it fails more often than average. The main concern is any fracture or welding defect on a wheel. Always check a specific car's full history before buying.
What MOT failures should I expect at high mileage?
Above 100,000 miles, the BMW 730 most commonly fails on any fracture or welding defect on a wheel and transmission shaft flexible coupling deteriorated. Under 60,000 miles, the main issues are transmission shaft flexible coupling deteriorated and any fracture or welding defect on a wheel.
How do I check a BMW 730's MOT history?
Enter the registration number into our free car check above. You'll see every MOT test result, advisories and failures, mileage readings, write-off status, and finance checks.
MOT failure data sourced from DVSA bulk test records via data.gov.uk. Ratios compare this model's failure rate against the national fleet average. Known issues sourced from manufacturer bulletins, specialist workshops, and verified owner reports.