Peugeot Partner car check
Find out if a Partner has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.
Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.
- Typical price
- £11,566584 at dealers
- MOT failure rate
- 27.3%643k tests
- Known problems
- 5across MK1 to MK3
- Full report
- £7.49one-off, no subscription
Which Partner are you looking at?
Each Partner generation has its own weak spots. Pick the one you’re viewing to see what to check.
-
Load sensing valve failure
Safety risk MK1, MK2The load sensing valve (LSV) regulates rear brake pressure based on vehicle loading in commercial variants. MOT data shows catastrophic failure rates at 249.8 times the fleet average on diesel models, with the valve becoming defective, seized, or inoperative. This component is critical for safe braking balance, particularly when loaded. Failure compromises emergency braking effectiveness and can cause dangerous rear wheel lock-up or inadequate braking force.
What to check: Visually inspect the load sensing valve mounted on the rear axle or suspension - look for corrosion, seized linkage arms, or disconnected springs. Check brake fluid reservoir level and colour - low fluid or dark contaminated fluid suggests system problems. Ask about recent brake performance - par...
-
Brake pedal anti-slip cover wear
Safety and MOT risk MK2, MK3The rubber anti-slip cover on the brake pedal becomes worn smooth, missing, or loose at exceptionally high rates compared to other vehicles. MOT data shows 103 times the fleet average failure rate, affecting all mileage bands including very low mileage vehicles. This suggests a design or material quality issue with the pedal cover. While not mechanically dangerous, it creates a slip hazard in wet conditions and is an MOT failure point.
What to check: Check the brake pedal surface - the rubber cover should be present, securely attached, and have a textured anti-slip pattern. Look for any loose edges, tears, or areas where the rubber has worn completely smooth. Press the pedal with your foot to check it doesn't slip - particularly important if ...
-
Power steering system failure
Wear item MK1Hydraulic power steering systems on first-generation Partners suffer fluid leaks and pump malfunctions at 38.4 times the fleet average. The steering pump, high-pressure lines, and rack seals are particular failure points. As a commercial vehicle often operated at maximum payload, the steering system works harder than on passenger cars, accelerating wear of seals and pump components.
What to check: Check power steering fluid reservoir level and colour - low level or dark, contaminated fluid indicates system problems. Look under the vehicle for fluid leaks around the steering rack, pump, and connecting lines. Examine the auxiliary belt that drives the power steering pump for wear, cracking, ...
-
Engine mounting deterioration
Wear item MK1, MK2Engine mountings deteriorate and fail at The rubber elements in the mountings degrade over time, particularly on commercial vehicles subjected to frequent load changes and stop-start driving. Failed mountings allow the engine to move excessively, stressing exhaust connections, wiring, and cooling hoses.
What to check: Open the bonnet and visually inspect visible engine mounts for cracked or separated rubber, oil contamination, or obvious sagging. Check for unusual gaps between engine and mounting brackets that suggest collapsed mounts. Look for witness marks on surrounding components that suggest excessive eng...
-
CV joint boot failure
Wear item MK1, MK2, MK3Constant velocity joint protective boots split or become displaced at 26.3 times the fleet average across all generations. The rubber boots protect the CV joints from dirt and moisture ingress while containing the lubricating grease. Commercial vehicle usage with frequent full-lock manoeuvring and heavy loading accelerates boot wear. Once split, the CV joint rapidly deteriorates due to contamination and grease loss.
What to check: Inspect both driveshafts for split, torn, or missing CV joint boots - check both inner and outer joints on each side. Look for grease that has been flung out from damaged boots, often visible on the inside of wheels or suspension components. Check that boot clips are secure and boots are properly...
We haven’t flagged any common problems for this generation in our data yet. A history check still tells you about finance, write-offs and theft, and the MOT history shows how this particular car has been looked after.
What Partners cost at dealers now
From 584 used Partners we track on UK dealer websites.
- Typical asking price
- £11,566
- Typical mileage
- 45,821 miles
- Price change vs last month
- -10.6%
Partner MOT results
of Partner MOT tests end in a fail, from 642,960 tests.
Most common reasons for failing
- Load sensing valve linkage defectiveBrakes
- Load sensing valve seized or inoperative and AB...Brakes
- Axle or kingpin wearSuspension
Check the Partner you’re buying
One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.
Finance, stolen, write-off and owner history data provided by Experian.
What the check includes
- Outstanding finance Experian
- Write-off status Experian
- Stolen vehicle check Experian
- Previous owners and keeper history Experian
- MOT history and advisories DVSA
- Mileage check DVSA
- Known problems for its generation GetCarWise
- How many are left on the road DVLA
Partner questions
Is the Peugeot Partner reliable?
27.3% of Partner models fail their MOT based on 642,960 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being load sensing valve failure. A full history check shows whether a specific car has had related write-offs or insurance claims.
What are the main problems with a Peugeot Partner?
The most serious known issues are load sensing valve failure, brake pedal anti-slip cover wear, power steering system failure. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Partner has been written off or had insurance claims linked to these faults.
How do I check if a Peugeot Partner has outstanding finance?
Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.
How do I check if a Peugeot Partner has been written off?
Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Partner has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.
Can I check a Peugeot Partner for free?
You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.
What does a Peugeot Partner fail its MOT on?
The most common MOT failure on the Partner is load sensing valve linkage defective. 27.3% of Partner models fail overall, based on 642,960 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.
More on the Partner
Other Peugeot car checks
Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.