Home/Car check/Peugeot/Bipper

Peugeot Bipper car check

Find out if a Bipper has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£5,1286 at dealers
MOT failure rate
27.1%97k tests
Known problems
5across BIPPER1
Full report
£7.49one-off, no subscription

Which Bipper are you looking at?

Each Bipper generation has its own weak spots. Here are the known problems.

  1. Power steering system failure

    Wear item BIPPER1

    The Bipper exhibits exceptionally high power steering system failure rates across both hydraulic pump and fluid circuit components. MOT data shows failure rates up to 60 times the national fleet average, indicating a fundamental design weakness in the power steering system. The issue affects both diesel variants with failures occurring across all mileage ranges from very low miles onwards. This suggests manufacturing defects rather than normal wear patterns.

    What to check: Check power steering fluid reservoir level - it should be clearly visible through the translucent reservoir. Low fluid indicates an active leak. Examine the area around the power steering pump (usually on the left side of the engine bay) for wet patches or dried fluid residue indicating pump seal...

  2. Suspension bush and joint premature wear

    Wear item BIPPER1

    The Bipper shows exceptional suspension component wear rates, failing MOT tests for worn bushes and joints at up to 65 times the national average. This affects multiple suspension components including shock absorber bushes and general suspension pins and joints. The pattern suggests inadequate component specification for the vehicle's commercial use profile or poor quality control in manufacturing.

    What to check: Visually inspect the front suspension strut tops for movement when pushing down on the front of the vehicle - excessive play indicates worn strut mount bushes. Check for obvious splits or deterioration in visible rubber components around the suspension arms. Look for uneven tyre wear patterns whi...

  3. Engine management light and emissions system faults

    Engine damage risk BIPPER1

    Diesel Bipper variants show significantly elevated rates of engine management light illumination and excessive exhaust smoke, indicating widespread emissions system problems. This likely involves DPF (diesel particulate filter) blockage, EGR valve issues, or sensor failures common to PSA diesel engines of this era. The combination of MIL illumination and smoke emissions suggests active fault conditions rather than intermittent problems.

    What to check: Check the dashboard for any warning lights, particularly the engine management light, DPF warning light, or anti-pollution system warnings. Ask the seller about recent DPF regeneration cycles or any emissions-related repairs. Check service history for evidence of DPF cleaning or EGR valve replace...

  4. Steering roughness and binding

    Wear item BIPPER1

    Beyond the power steering system failures, the Bipper also shows elevated rates of steering roughness in operation, indicating mechanical problems with the steering rack or column components. This manifests as binding, notchy feel, or excessive friction when turning the steering wheel, distinct from power assistance issues.

    What to check: Turn the steering wheel from lock to lock with the engine off - it should move smoothly without binding, catching, or requiring excessive force at any point in the travel. Check for any play or free movement in the steering wheel before the wheels begin to turn. Look for signs of steering rack bo...

  5. Brake pedal rubber deterioration

    Safety and MOT risk BIPPER1

    The Bipper exhibits unusually high failure rates for brake pedal anti-slip provision, typically the rubber pedal cover or grip surface. This is a specific design weakness where the pedal rubber wears smooth or becomes loose at much higher rates than other vehicles. While not mechanically serious, it represents a safety concern for pedal grip and will cause MOT failure.

    What to check: Examine the brake pedal surface for wear, cracking, or smooth areas where the anti-slip pattern has worn away. Check if the rubber pedal cover moves or feels loose when pressed. Look for any missing pieces or excessive wear that would affect foot grip on the pedal surface.

What Bippers cost at dealers now

From 6 used Bippers we track on UK dealer websites.

Typical asking price
£5,128
Typical mileage
76,422 miles
Price change vs last month
—

Bipper MOT results

27.1%

of Bipper MOT tests end in a fail, from 97,121 tests.

Most common reasons for failing

  1. Light unit faultLights & Electrics
  2. Power steering faultSteering
  3. Headlight faultLights & Electrics

Check the Bipper you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Bipper questions

Is the Peugeot Bipper reliable?

27.1% of Bipper models fail their MOT based on 97,121 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being power steering system failure. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Peugeot Bipper?

The most serious known issues are power steering system failure, suspension bush and joint premature wear, engine management light and emissions system faults. Our car check flags whether a specific Bipper has been written off or had insurance claims linked to these faults.

How do I check if a Peugeot Bipper has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Peugeot Bipper has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Bipper has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Peugeot Bipper for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Peugeot Bipper fail its MOT on?

The most common MOT failure on the Bipper is light unit fault. 27.1% of Bipper models fail overall, based on 97,121 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Bipper

Other Peugeot car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.