Home/Car check/Peugeot/508

Peugeot 508 car check

Find out if a Peugeot 508 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£13,152115 at dealers
MOT failure rate
20.8%61k tests
Known problems
8across Mk1 to Mk2
Full report
£7.49one-off, no subscription

Which 508 are you looking at?

Each 508 generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Timing chain issues

    Engine damage risk Mk1

    The EP6 1.6 THP engine uses a single-row timing chain that stretches prematurely due to inadequate oil change intervals and design limitations. The chain tensioner cannot compensate for excessive stretch, causing timing retardation and potential valve-to-piston contact. This is a well-documented failure mode across the PSA group (Peugeot, Citroën, DS) affecting multiple models with this engine. Chain replacement requires engine removal or significant dismantling work. Later EP6 revisions improved the tensioner design but did not eliminate the issue entirely.

    What to check: Check service history for oil change frequency - irregular or extended intervals accelerate chain wear. Look for any metallic rattling noise from the engine bay when the bonnet is opened cold. Request any diagnostic scans showing timing correlation faults or camshaft position sensor errors.

  2. DPF blockage and regeneration issues

    Wear item Mk1

    The diesel particulate filter (DPF) on DV6 1.6 HDi and DW10 2.0 HDi engines blocks with soot when used primarily for short journeys or stop-start driving. The regeneration system requires sustained high exhaust temperatures that cannot be achieved in urban use. PSA's DPF design is particularly sensitive to fuel quality and oil contamination. When regeneration fails repeatedly, the DPF becomes irreversibly blocked and requires replacement. This is exacerbated by owners ignoring DPF warning lights and continuing to drive when regeneration is needed.

    What to check: Check the dashboard for any DPF warning lights or service messages. Look for a DPF symbol (rectangular box with dots) or anti-pollution system warnings. Ask about recent driving patterns - cars used only for short journeys are at high risk. Check service history for evidence of DPF cleaning or re...

  3. Turbocharger failure

    Engine damage risk Mk1

    The DW12 2.2 HDi engine uses a variable geometry turbocharger that fails due to carbon build-up in the variable vane mechanism and bearing wear from oil contamination. Extended oil change intervals and poor-quality diesel fuel accelerate the failure. The turbo actuator mechanism seizes, causing overboosting or complete loss of boost pressure. This engine was primarily used in higher-specification 508s and shared with other PSA models. Turbocharger replacement requires removal of significant engine ancillaries and heat shields.

    What to check: Check for any blue or white smoke visible around the engine bay, particularly from the turbo area (passenger side of engine). Look for oil leaks around the turbo housing or oil lines. Check service history for oil change frequency - irregular changes accelerate turbo bearing wear. Inspect the air...

  4. CV joint boot deterioration

    Wear item Mk1

    The CV joint boots on diesel variants deteriorate at 64.3x the fleet average rate, with the highest failure rate occurring unusually early at 20,000-40,000 miles. The rubber compound appears particularly susceptible to degradation from road salt and temperature cycling. Once the boot splits, dirt and water contaminate the CV joint bearing surfaces, leading to joint failure within 10,000-20,000 miles. This affects both outer and inner CV joints on both sides.

    What to check: Inspect the CV joint boots visually with the wheels straight. Look for splits, cracks, or grease leakage around the boot clamps. Check for grease deposits on the inside of the wheel rims which indicates boot failure. Run your finger around each boot feeling for cracks or soft spots in the rubber.

  5. Suspension component wear and corrosion

    Wear item Mk1

    Suspension components fail at 64.3x the fleet average rate, primarily affecting bushes, ball joints, and anti-roll bar links. The failure pattern shows premature wear from 40,000 miles onwards, suggesting the rubber compound or design is inadequate for UK road conditions. Corrosion of metal components accelerates in winter salt conditions. This affects multiple suspension points simultaneously, requiring comprehensive inspection of the entire system.

    What to check: Inspect the front suspension visually for any obvious corrosion on springs, dampers, or control arms. Check anti-roll bar links for play by pushing the bar up and down by hand. Look for oil leaks from dampers and cracked rubber bushes around suspension mounting points.

  6. Excessive diesel exhaust smoke

    Wear item Mk1

    Smoke opacity failures occur at 0 HDi engines. This indicates incomplete combustion due to worn fuel injectors, failed EGR valves, or blocked DPF regeneration cycles. The high failure rate suggests systematic issues with the emissions control systems rather than isolated component failures. Modern diesel emissions testing is strict, and marginal engines that passed older tests now fail current standards.

    What to check: Check the exhaust tailpipe for excessive black carbon deposits which indicate poor combustion. Ask about recent DPF regeneration cycles or cleaning work. Look for any EGR valve or fuel system warning lights on the dashboard.

  7. Power steering system failure

    Wear item Mk1

    Power steering failures occur at 29.9x the fleet average rate, typically manifesting as fluid leaks from the pump or high-pressure lines. The hydraulic system uses engine-driven pumps that develop leaks at the shaft seal or pressure connections. Steering becomes progressively heavier as fluid level drops, eventually requiring significant effort for parking maneuvers. The system design appears prone to seal degradation in the UK climate.

    What to check: Check the power steering fluid reservoir level and colour - dark or contaminated fluid indicates system problems. Look under the car for red hydraulic fluid stains indicating leaks from pump or lines. Inspect the pump pulley area for fluid residue or belt contamination.

  8. Premature brake pad wear

    Safety and MOT risk Mk1, Mk2

    Brake pad wear occurs at 6 petrol variants at 0-20,000 miles. This suggests either aggressive initial bedding-in requirements, soft pad compound, or brake system design that promotes rapid wear. The pattern affects both petrol and diesel variants but is most pronounced on lower-mileage examples, indicating a design characteristic rather than abuse-related wear.

    What to check: Inspect brake pads through wheel spokes if visible - look for remaining friction material thickness. Check for any brake dust buildup on wheels that indicates high wear rates. Ask about recent brake pad replacement frequency compared to previous vehicles.

What 508s cost at dealers now

From 115 used 508s we track on UK dealer websites.

Typical asking price
£13,152
Typical mileage
48,714 miles
Price change vs last month
-10.7%

508 MOT results

20.8%

of 508 MOT tests end in a fail, from 61,246 tests.

Most common reasons for failing

  1. Suspension pin, bush or jointSuspension
  2. Stop lamp with a multiple light source up to 1/...Lights & Electrics
  3. Headlight faultLights & Electrics

Check the 508 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

508 questions

Is the Peugeot 508 reliable?

20.8% of 508 models fail their MOT based on 61,246 tests analysed. That’s about average for the class. There are 8 known problems to watch for, the most serious being timing chain issues. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Peugeot 508?

The most serious known issues are timing chain issues, dpf blockage and regeneration issues, turbocharger failure. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific 508 has been written off or had insurance claims linked to these faults.

How do I check if a Peugeot 508 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Peugeot 508 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N 508 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Peugeot 508 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Peugeot 508 fail its MOT on?

The most common MOT failure on the 508 is suspension pin, bush or joint. 20.8% of 508 models fail overall, based on 61,246 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the 508

Other Peugeot car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.