Home/Car check/Peugeot/306

Peugeot 306 car check

Find out if a Peugeot 306 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
31.1%191k tests
Known problems
5across 306
Full report
£7.49one-off, no subscription

Which 306 are you looking at?

Each 306 generation has its own weak spots. Here are the known problems.

  1. Brake hose deterioration and failure

    Safety risk 306

    Flexible brake hoses on the 306 deteriorate at an exceptional rate compared to other vehicles of this era. The MOT data shows failure rates over 130 times the national fleet average on some variants. The rubber compounds used appear prone to cracking, chafing and internal breakdown, which can cause sudden brake fluid loss or restricted brake pressure. This affects all engine variants and becomes critical on higher mileage examples where hoses may be original.

    What to check: Visually inspect all flexible brake hoses at each wheel and where they connect to rigid brake lines on the chassis. Look for surface cracking, bulging, chafing against suspension components, or wet brake fluid around connections. Check brake fluid level in the reservoir - it should be between min...

  2. Steering rack gaiter and ball joint dust cover failure

    Wear item 306

    The rubber gaiters protecting the steering rack and ball joints fail at over 40 times the fleet average according to MOT data. Once these protective boots are torn or missing, dirt and moisture contaminate the steering components causing rapid wear of ball joints and steering rack internals. This is particularly problematic on the 306 due to the design and rubber compound used.

    What to check: Inspect the steering rack gaiters (rubber boots) at each end of the steering rack under the bonnet area - look for splits, tears, or missing sections. Check ball joint dust covers at the outer ends of track rod ends - these should be intact black rubber boots without cracks. Look for grease that ...

  3. Emissions system deterioration - petrol variants

    Engine damage risk 306

    Petrol variants show emissions failures at up to This exceptionally high rate suggests systematic problems with the catalytic converter, lambda sensors, or engine management system on these engines. The 306 petrol engines use early emissions control technology that deteriorates more rapidly than modern equivalents.

    What to check: Check for any warning lights on the dashboard related to engine management or emissions. Look at the exhaust tail pipe - excessive black deposits suggest rich running which will cause emissions failures.

  4. Brake caliper seizure

    Safety and MOT risk 306

    MOT data shows brake imbalance failures at over 25 times the fleet average, indicating widespread brake caliper seizure problems. The 306 uses single-piston sliding calipers that are prone to corrosion of the slider pins and piston seals, causing uneven braking forces between wheels on the same axle. This creates dangerous braking imbalance and premature pad wear.

    What to check: Check brake disc condition visually - one disc significantly more worn or scored than its pair indicates caliper seizure. Look for brake fluid leaks around caliper areas. Check wheel rims for excessive brake dust buildup on one side compared to the other.

  5. Exhaust system corrosion and mounting failure

    Wear item 306

    The exhaust system fails at over 20 times the fleet average according to MOT data, with particularly high failure rates on younger vehicles suggesting poor corrosion resistance. The mild steel construction and mounting system design make the 306 exhaust system prone to premature rust-through and mounting bracket failure, especially at the flexible joint and rear silencer.

    What to check: Walk around the car and visually inspect the exhaust system from underneath if possible. Look for rust holes, hanging sections, or loose mounting brackets. Check the flexible joint section near the manifold for cracking or separation. Look for black soot deposits around joints indicating gas leak...

306 MOT results

31.1%

of 306 MOT tests end in a fail, from 191,169 tests.

Most common reasons for failing

  1. Brake hoses perished or damagedBrakes
  2. Emissions failureExhaust & Emissions
  3. Cable damaged or knottedBrakes

Check the 306 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

306 questions

Is the Peugeot 306 reliable?

31.1% of 306 models fail their MOT based on 191,169 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being brake hose deterioration and failure. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Peugeot 306?

The most serious known issues are brake hose deterioration and failure, steering rack gaiter and ball joint dust cover failure, emissions system deterioration - petrol variants. Our car check flags whether a specific 306 has been written off or had insurance claims linked to these faults.

How do I check if a Peugeot 306 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Peugeot 306 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N 306 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Peugeot 306 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Peugeot 306 fail its MOT on?

The most common MOT failure on the 306 is brake hoses perished or damaged. 31.1% of 306 models fail overall, based on 191,169 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the 306

Other Peugeot car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.