Home/Car check/Peugeot/208

Peugeot 208 car check

Find out if a Peugeot 208 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£13,9284,018 at dealers
MOT failure rate
20.2%481k tests
Known problems
10across A9 to GTi
Full report
£7.49one-off, no subscription

Which 208 are you looking at?

Each 208 generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Wet timing belt failure

    Safety risk All

    The 1.2 PureTech three-cylinder engine uses a timing belt that runs in an oil bath (wet belt system) instead of the traditional dry belt. This belt is critical for valve timing and drives the oil pump. The belt material degrades in the oil environment and can fail catastrophically without warning, causing immediate engine destruction. When the belt fails, pistons hit open valves causing bent valves, damaged pistons, and requiring complete engine rebuild. This design was abandoned by PSA due to the high failure rate.

    What to check: Check the service history specifically for timing belt replacement - look for invoices showing wet timing belt service at 60,000 mile intervals or less. Pull the oil dipstick and examine the oil in bright light - look for any black fibrous material, gritty texture, or unusual debris that indicate...

  2. Timing chain tensioner failure

    Safety risk GTi

    The 1.6 THP engine (Prince engine co-developed with BMW) suffers from timing chain tensioner failure due to inadequate oil pressure to the tensioner mechanism. The hydraulic tensioner cannot maintain proper chain tension, causing the timing chain to rattle and potentially jump timing. This is a well-documented fault affecting both Peugeot and BMW variants of this engine. Chain jump causes valve-to-piston contact in this interference engine, resulting in catastrophic internal damage.

    What to check: Check service history for timing chain tensioner replacement - look for invoices mentioning timing chain work or engine rattle repairs. Ask about oil change frequency - irregular oil changes accelerate tensioner wear through oil contamination. Request any fault code history - timing-related codes...

  3. Camshaft timing chain stretch

    Engine damage risk All

    The 1.5 BlueHDi diesel engine uses a camshaft timing chain that experiences premature stretch due to high combustion loads and oil contamination from DPF regeneration cycles. Chain stretch causes timing drift leading to poor performance, increased emissions, and potential valve timing errors. Unlike the catastrophic wet belt failure on petrol engines, this issue typically develops gradually with warning signs.

    What to check: Connect an OBD reader and check for timing-related fault codes, particularly P0016, P0017, P0020, P0021 which indicate camshaft-crankshaft correlation errors. Check service history for oil change frequency - extended intervals accelerate chain wear through oil degradation.

  4. Brake vacuum pump failure

    Safety and MOT risk GTi

    The 1.6 THP engine uses a mechanical brake vacuum pump driven from the camshaft to provide brake servo assistance. This pump is prone to failure due to wear of internal diaphragms and seals. Pump failure results in loss of brake servo assistance, requiring significantly more pedal effort to achieve the same braking force. This creates a dangerous situation especially in emergency braking scenarios.

    What to check: Check for any brake warning lights on the dashboard which may indicate vacuum system issues. Look for any obvious vacuum lines that are disconnected or damaged around the brake servo unit.

  5. Carbon buildup on intake valves

    Engine damage risk GTi

    The 1.6 THP engine uses direct injection where fuel is injected directly into the combustion chamber, bypassing the intake valves. This means the intake valves receive no fuel wash to clean them, allowing carbon deposits from crankcase ventilation gases to build up on the valve heads. Carbon buildup restricts airflow causing reduced power, rough idle, and increased fuel consumption. This affects all direct injection engines but is particularly severe on this engine.

    What to check: Connect an OBD reader and check for misfire codes (P0300-P0304) which can indicate cylinder-specific carbon buildup affecting valve sealing. Ask about service history specifically for walnut blasting or carbon cleaning services.

  6. Oil contamination from belt debris

    Engine damage risk All

    As the wet timing belt in the 1.2 PureTech engine ages, it sheds rubber particles and fibrous material into the engine oil. This contamination appears as black debris in the oil and can cause accelerated wear of engine bearings and oil pump. The contamination is often the first sign of impending belt failure, making regular oil inspection critical for early detection.

    What to check: Pull the oil dipstick and examine the oil closely in bright light - look for any black fibrous material, gritty texture, or unusual debris suspended in the oil. Check oil colour - contaminated oil appears darker than normal even when recently changed. Rub a small amount of oil between your finger...

  7. Electrical and infotainment faults

    Electrical All, GTi

    The 208 uses complex electrical systems and integrated infotainment that are prone to software glitches and hardware failures. Common issues include touchscreen freezing, Bluetooth connectivity problems, instrument cluster warning light malfunctions, and intermittent electrical faults. These issues are often related to software bugs or poor electrical connections rather than component failure.

    What to check: Check all warning lights illuminate correctly when ignition is turned on, then extinguish after engine start - flickering or stuck lights indicate electrical issues. Test the touchscreen responsiveness by navigating through menus - look for delayed response or complete freezing. Check all interio...

  8. Exhaust system corrosion and mounting failure

    Wear item All, GTi

    MOT data shows the 208 fails exhaust system tests at 263.4x the fleet average rate, particularly affecting younger vehicles with low mileage. This indicates a design weakness in exhaust mounting or pipe construction causing premature failure. The issue affects all engine variants but is most severe on 1.4L variants. Exhaust system failures can occur from corrosion, mounting bracket failure, or heat shield problems.

    What to check: Visually inspect the exhaust system from behind the car - look for obvious corrosion, holes, or hanging sections. Check exhaust mounting rubbers and brackets for cracking or separation. Look for heat shield damage or loose sections that could rattle against the exhaust.

  9. CV joint boot failure

    Wear item All, GTi

    MOT data shows the 208 fails CV joint boot inspections at 263.4x the fleet average rate across all engine variants. CV joint boots protect the constant velocity joints from dirt and water ingress while retaining lubricating grease. Boot failure leads to contamination of the CV joint causing eventual failure. The high failure rate suggests poor quality boot material or design issues with boot retention.

    What to check: With the wheels turned to full lock, visually inspect the CV joint boots on both front wheels for any splits, cracks, or missing sections. Look for grease around the wheel area which indicates boot failure allowing grease to escape. Check that the boot clamps are secure and not damaged.

  10. Lambda sensor and emissions system failure

    Engine damage risk All

    This affects fuel mixture control and catalytic converter efficiency. Lambda sensors degrade over time causing incorrect air-fuel mixture readings leading to poor emissions performance and potential catalytic converter damage.

    What to check: Connect an OBD reader and check for lambda sensor fault codes (P0130-P0135, P0150-P0155) or fuel mixture codes (P0171, P0172). Check service history for any previous emissions-related repairs or lambda sensor replacements.

What 208s cost at dealers now

From 4,018 used 208s we track on UK dealer websites.

Typical asking price
£13,928
Typical mileage
19,883 miles
Price change vs last month
+2.5%

208 MOT results

20.2%

of 208 MOT tests end in a fail, from 480,539 tests.

Most common reasons for failing

  1. Coil springs brokenSuspension
  2. Anti-roll bar links wornSuspension
  3. Engine mounting/bracket severely damaged or det...Bodywork

Check the 208 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

208 questions

Is the Peugeot 208 reliable?

20.2% of 208 models fail their MOT based on 480,539 tests analysed. That’s about average for the class. There are 10 known problems to watch for, the most serious being wet timing belt failure. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Peugeot 208?

The most serious known issues are wet timing belt failure, timing chain tensioner failure, camshaft timing chain stretch. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific 208 has been written off or had insurance claims linked to these faults.

How do I check if a Peugeot 208 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Peugeot 208 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N 208 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Peugeot 208 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Peugeot 208 fail its MOT on?

The most common MOT failure on the 208 is coil springs broken. 20.2% of 208 models fail overall, based on 480,539 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the 208

Other Peugeot car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.