Home/Car check/Nissan/Murano

Nissan Murano car check

Find out if a Murano has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
26.5%11k tests
Known problems
5across Z50 to Z51
Full report
£7.49one-off, no subscription

Which Murano are you looking at?

Each Murano generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Front suspension ball joint excessive wear

    Wear item Z50, Z51

    The front suspension ball joints on the Murano show abnormally rapid wear, particularly the lower ball joints. MOT data shows this model fails at 12.6 times the fleet average rate for ball joint wear between 40,000-60,000 miles. The joints develop excessive free play that affects steering precision and can lead to complete separation if left unchecked. This appears to be a design weakness affecting both generations, with the rubber boots often splitting early and allowing contamination.

    What to check: Raise the front wheels and support the vehicle securely on axle stands. Grasp each front wheel at the 12 o'clock and 6 o'clock positions and attempt to rock it vertically - any clunking or movement indicates ball joint wear. Visually inspect the ball joint rubber boots (located where the suspensi...

  2. Suspension bushes and joints premature wear

    Wear item Z50, Z51

    Multiple suspension bushes and joints throughout the system show accelerated wear on the Murano. MOT data shows failure rates 12.5 times the fleet average, affecting both front and rear suspension components. The rubber bushes in the control arms, anti-roll bar links, and subframe mounts deteriorate prematurely, leading to noise, vibration, and reduced handling precision. This appears to be a systemic issue with the suspension design rather than isolated component failures.

    What to check: Visually inspect all visible rubber bushes around the front and rear suspension for cracking, perishing, or obvious deterioration. Look under the vehicle for any components that appear to be sitting at unusual angles or have excessive movement. Check for oil or grease contamination on bushes whic...

  3. Power steering fluid leaks and system malfunction

    Wear item Z50, Z51

    The hydraulic power steering system develops leaks and malfunctions at a rate 10.9 times higher than the fleet average, particularly on higher mileage examples. Common failure points include the power steering pump seals, high-pressure hoses, and steering rack seals. The system uses a belt-driven hydraulic pump that is prone to internal seal failure, leading to fluid loss and eventual pump failure.

    What to check: Check the power steering fluid reservoir level and condition - low level or dark, contaminated fluid indicates system problems. Inspect the ground under the vehicle for red or amber fluid stains indicating power steering leaks. Visually trace the high-pressure power steering lines from the pump t...

  4. CVT transmission failure and erratic shifting

    Wear item Z50, Z51

    The Continuously Variable Transmission (CVT) in the Murano has documented reliability problems including juddering, slipping, complete failure, and erratic shifting behavior. NHTSA data shows 91 specific CVT-related complaints from US owners, with many reporting sudden loss of acceleration or transmission failure requiring complete replacement. The CVT uses a belt and pulley system that is sensitive to fluid condition and operating temperature.

    What to check: Check the CVT fluid level and condition using the transmission dipstick (if accessible) - fluid should be clean and red/pink in color, not brown or burnt smelling. Ask the seller for evidence of CVT fluid changes at the recommended intervals - irregular servicing accelerates CVT failure. Listen f...

  5. CV joint boot deterioration

    Wear item Z50, Z51

    The constant velocity joint rubber boots deteriorate at 3.5 times the fleet average rate, particularly affecting the outer CV joints. When the boot splits, grease escapes and contaminants enter the joint, leading to accelerated wear and eventual joint failure. This is a common issue on the Murano that requires prompt attention to prevent more expensive driveshaft replacement.

    What to check: Visually inspect the CV joint boots at both ends of each front driveshaft for splits, tears, or grease leakage. Look for grease splattered on the inside of the wheel rim or around the CV joint area. Check that the boot clamps are secure and not damaged. Examine the boot material for cracking or p...

Murano MOT results

26.5%

of Murano MOT tests end in a fail, from 10,736 tests.

Most common reasons for failing

  1. Track rod ends wornSteering
  2. Anti-roll bar links wornSuspension
  3. Subframe bushes or mounts wornSuspension

Check the Murano you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Murano questions

Is the Nissan Murano reliable?

26.5% of Murano models fail their MOT based on 10,736 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being front suspension ball joint excessive wear. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Nissan Murano?

The most serious known issues are front suspension ball joint excessive wear, suspension bushes and joints premature wear, power steering fluid leaks and system malfunction. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Murano has been written off or had insurance claims linked to these faults.

How do I check if a Nissan Murano has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Nissan Murano has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Murano has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Nissan Murano for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Nissan Murano fail its MOT on?

The most common MOT failure on the Murano is track rod ends worn. 26.5% of Murano models fail overall, based on 10,736 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Murano

Other Nissan car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.