Home/Car check/Mitsubishi/Pajero

Mitsubishi Pajero car check

Find out if a Pajero has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
25.7%2k tests
Known problems
5across Gen2 to Gen3
Full report
£7.49one-off, no subscription

Which Pajero are you looking at?

Each Pajero generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Chassis and subframe structural corrosion

    Safety risk Gen2, Gen3

    The Pajero's ladder-frame chassis and mounting points for suspension and subframe components are highly susceptible to corrosion, particularly around the rear spring hangers, shock absorber mounts, and chassis rails. The combination of exposed chassis construction and inadequate factory protection leads to severe weakening of load-bearing areas. This affects the vehicle's fundamental structural integrity and is a major safety concern.

    What to check: Inspect the rear of the vehicle from underneath, looking for rust perforation or flaking around the rear spring mounting points and shock absorber brackets. Check the chassis rails running along each side of the vehicle for evidence of structural rust or previous welding repairs. Examine the fron...

  2. Steering system excessive wear and play

    Safety risk Gen2, Gen3

    The steering rack and associated linkages on the Pajero suffer from premature wear, creating excessive free play at the steering wheel. MOT data shows steering play failures at 86.5 times the fleet average, with ball joint wear at 34.2 times average. The combination of heavy vehicle weight, off-road use history, and inadequate sealing of steering components leads to accelerated deterioration. This represents a serious safety hazard as steering response becomes unpredictable.

    What to check: With the engine off and front wheels on the ground, turn the steering wheel left and right while observing how much movement occurs before the front wheels begin to turn - more than 2-3 inches of rim movement indicates excessive wear. Have an assistant turn the steering wheel while you observe th...

  3. Wheel bearing failure

    Wear item Gen2, Gen3

    Wheel bearings on the Pajero fail at 14 times the fleet average according to MOT data, with 1,685 recorded failures. The heavy vehicle weight combined with off-road use puts excessive stress on the bearing assemblies. Poor sealing allows contamination to enter the bearings, accelerating wear. Both front and rear bearings are affected, with failure typically occurring between 100,000-150,000 miles.

    What to check: Jack up each wheel in turn and check for play by grasping the wheel at 12 and 6 o'clock positions and attempting to rock it - any movement indicates bearing wear. Spin each wheel by hand and listen for grinding, rumbling, or rough rotation sounds. Check for heat buildup around wheel hubs after dr...

  4. Brake line corrosion and failure

    Safety and MOT risk Gen2, Gen3

    Brake pipes and flexible hoses corrode at 5.4 times the fleet average on the Pajero, with 5,014 MOT failures recorded. The exposed brake line routing and inadequate protection from road salt and debris leads to perforation of steel brake pipes. Flexible brake hoses also deteriorate due to age and exposure. This creates a direct safety hazard through potential brake system failure.

    What to check: Inspect all visible brake lines under the vehicle for signs of corrosion, particularly around connection points and where lines pass through the chassis. Check flexible brake hoses at each wheel for cracking, bulging, or weeping - pay particular attention to where the hose flexes. Look for brake ...

  5. Suspension component wear and failure

    Wear item Gen2, Gen3

    Suspension bushes, joints, and shock absorber components fail at significantly higher rates than average on the Pajero. MOT data shows shock absorber bush failures at 13.6 times fleet average and general suspension component wear at 8.7 times average. The heavy vehicle weight, tall ride height, and off-road capability result in high stress on suspension components, causing premature wear of rubber bushes and joint seals.

    What to check: Inspect visible suspension components through the wheel arches for cracked or perished rubber bushes, particularly around control arms and anti-roll bar links. Check shock absorber bodies for oil leakage or damage to the mounting bushes. Look for uneven tyre wear patterns that could indicate susp...

Pajero MOT results

25.7%

of Pajero MOT tests end in a fail, from 2,411 tests.

Most common reasons for failing

  1. Free play in the steering, measured at the rim ...Steering
  2. Track rod ends wornSteering
  3. Fixings missing or insecureBodywork

Check the Pajero you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Pajero questions

Is the Mitsubishi Pajero reliable?

25.7% of Pajero models fail their MOT based on 2,411 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being chassis and subframe structural corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Mitsubishi Pajero?

The most serious known issues are chassis and subframe structural corrosion, steering system excessive wear and play, wheel bearing failure. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific Pajero has been written off or had insurance claims linked to these faults.

How do I check if a Mitsubishi Pajero has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Mitsubishi Pajero has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Pajero has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Mitsubishi Pajero for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Mitsubishi Pajero fail its MOT on?

The most common MOT failure on the Pajero is free play in the steering, measured at the rim .... 25.7% of Pajero models fail overall, based on 2,411 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Pajero

Other Mitsubishi car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.