Home/Car check/Mazda/E Series

Mazda E Series car check

Find out if a E Series has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

MOT failure rate
29.6%9k tests
Known problems
5across E2000 to E2200
Full report
£7.49one-off, no subscription

Which E Series are you looking at?

Each E Series generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Structural corrosion reducing assembly rigidity

    Safety risk E2000, E2200

    The E-series suffers from severe structural corrosion that compromises the load-bearing integrity of the chassis and body assembly. MOT data shows this model fails at 28.4 times the national fleet average for structural corrosion that reduces rigidity. This affects the vehicle's ability to carry loads safely and represents a serious safety risk. The corrosion typically affects areas around suspension mounting points and load-bearing sections of the chassis.

    What to check: Inspect the chassis rails and cross-members underneath the vehicle for visible rust, particularly around suspension mounting points and the rear axle area. Look for flaking paint, rust staining, or visible holes through metal sections. Check the area within 30cm of any suspension component mounti...

  2. Suspension mounting point corrosion

    Safety risk E2000, E2200

    The E-series shows severe corrosion problems in prescribed areas within 30cm of suspension component mounting points. MOT data indicates failures at 13.4 times the national average, with the problem worsening over recent years. This affects the structural integrity of suspension mounting points and can lead to suspension components detaching from the vehicle. Commercial loading patterns accelerate stress on these already weakened mounting points.

    What to check: Inspect all suspension mounting points on both front and rear axles for visible corrosion, particularly around spring seats and shock absorber mounting brackets. Look for rust perforation or thinning metal within 30cm of any suspension component attachment point. Check for previous welding repair...

  3. Excessive suspension component wear

    Wear item E2000, E2200

    MOT data shows the E-series fails at 85.1 times the national fleet average for excessively worn suspension pins, bushes, and joints. This is the highest failure rate in the MOT dataset for this model. The commercial duty cycle, combined with the vehicle's age profile, accelerates wear on suspension components. The 2.2 diesel variants show particularly high failure rates, likely due to the additional weight of the diesel engine and typical commercial loading patterns.

    What to check: Inspect all visible suspension components for cracked or perished rubber bushes, particularly around the rear leaf spring mounting points and front suspension arms. Check for excessive play by attempting to move suspension components by hand - any looseness indicates worn bushes or joints. Look u...

  4. Wheel bearing failure

    Wear item E2000

    The 2.2 diesel E-series shows wheel bearing failures at 5.2 times the national fleet average, specifically in the 120-150k mile range. The additional weight of the diesel engine and typical commercial loading patterns put extra stress on wheel bearings. This failure rate has been worsening over recent years as the vehicle population ages. Failed wheel bearings can cause wheel detachment in extreme cases.

    What to check: Jack up each wheel in turn and attempt to rock it both vertically and horizontally - any play indicates bearing wear. Spin each wheel by hand and listen for grinding, rumbling, or rough rotation which indicates bearing deterioration. Check for heat build-up after a test drive by carefully feeling...

  5. Suspension joint dust cover deterioration

    Wear item E2000, E2200

    The E-series shows a failure rate 25.4 times higher than the national fleet average for severely deteriorated suspension joint dust covers. While not immediately dangerous, failed dust covers allow contamination into suspension joints, accelerating wear and leading to more serious component failures. This issue affects both petrol and diesel variants but is particularly pronounced on the 2.2 diesel models at higher mileages.

    What to check: Inspect all visible suspension ball joint dust covers and CV joint boots for splits, tears, or complete deterioration. Look for grease contamination around suspension joints which indicates failed dust covers allowing lubricant to escape. Check the steering rack gaiters for similar deterioration....

E Series MOT results

29.6%

of E Series MOT tests end in a fail, from 9,390 tests.

Most common reasons for failing

  1. Excessive wear or play in a universal joint or ...Steering
  2. Coil springs brokenSuspension
  3. Suspension joint dust cover severely deterioratedSuspension

Check the E Series you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

E Series questions

Is the Mazda E Series reliable?

29.6% of E Series models fail their MOT based on 9,390 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being structural corrosion reducing assembly rigidity. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Mazda E Series?

The most serious known issues are structural corrosion reducing assembly rigidity, suspension mounting point corrosion, excessive suspension component wear. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific E Series has been written off or had insurance claims linked to these faults.

How do I check if a Mazda E Series has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Mazda E Series has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N E Series has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Mazda E Series for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Mazda E Series fail its MOT on?

The most common MOT failure on the E Series is excessive wear or play in a universal joint or .... 29.6% of E Series models fail overall, based on 9,390 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the E Series

Other Mazda car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.