Home/Car check/Mazda/6

Mazda 6 car check

Find out if a Mazda 6 has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£11,618116 at dealers
MOT failure rate
23.8%459k tests
Known problems
6across GG to GJ
Full report
£7.49one-off, no subscription

Which 6 are you looking at?

Each 6 generation has its own weak spots. Pick the one you’re viewing to see what to check.

  1. Subframe and suspension mounting point corrosion

    Safety risk GG/GH, GJ

    The Mazda 6 suffers from severe corrosion around subframe mounting points and suspension component attachment areas. The steel subframe and surrounding chassis areas are inadequately protected from salt water ingress, leading to structural corrosion that compromises vehicle rigidity and suspension mounting integrity. This affects both generations but is particularly severe on 2002-2008 models. MOT data shows this model failing at up to 94.7 times the national average for suspension component corrosion and 58.4 times the average for mounting point corrosion. The issue worsens progressively and represents a genuine safety risk.

    What to check: Crouch down at each corner of the car and visually inspect the area where the suspension struts or wishbones meet the body. Look for brown rust staining, flaky metal, or visible holes in the metalwork. Check the rear wheel arch areas from inside the boot - remove the carpet and spare wheel to exp...

  2. DPF regeneration issues and blockage

    Wear item GJ

    The diesel particulate filter (DPF) on 2.2-litre diesel Mazda 6 models suffers from frequent blockage issues, particularly when used for predominantly short urban journeys. The DPF requires regular high-temperature regeneration cycles to burn off accumulated soot particles, but insufficient motorway driving prevents this process. The SH-VPTS Skyactiv-D engine is particularly affected due to its advanced combustion system producing fine soot particles. Blocked DPF causes excessive smoke emission, reduced power, and eventual engine protection mode activation.

    What to check: Ask the seller about the car's typical usage pattern - cars used mainly for short urban trips are at highest risk of DPF issues. Check the dashboard for any DPF warning lights or engine management lights. Ask when the DPF was last regenerated or serviced - recent professional cleaning may indicat...

  3. Rear suspension bush deterioration

    Wear item GG/GH, GJ

    The rear suspension trailing arm bushes and lateral link bushes on the Mazda 6 deteriorate prematurely due to their rubber composition and exposure to road contaminants. This is separate from the structural corrosion issue but contributes to the high MOT failure rates for suspension components. Worn bushes cause imprecise rear axle location, leading to poor handling, tyre wear, and eventual MOT failure for excessive movement in suspension components.

    What to check: Walk around to the back of the car and visually inspect the rear suspension arms visible through the wheel arches. Look for cracked or perished rubber bushes at the mounting points. Check the rear tyres for uneven wear patterns across the width - this often indicates worn rear bushes allowing rea...

  4. Parking brake cable corrosion and adjustment

    Safety and MOT risk GG/GH, GJ

    The rear parking brake cables on the Mazda 6 are prone to corrosion and stretching, leading to poor handbrake efficiency that fails MOT requirements. The cables run under the car and are exposed to road salt and water, causing the inner cable to seize within the outer sheath. This affects all variants but is particularly common on cars used in areas with heavy winter salt use. MOT data shows this model failing at 27.3 times the national average for parking brake efficiency.

    What to check: Apply the handbrake and count the number of clicks - it should hold the car securely within 5-7 clicks. If it requires more clicks or feels spongy, the cables likely need adjustment or replacement. Look under the rear of the car (if safely possible) for any visible corrosion on the brake cables r...

  5. Excessive oil consumption

    Engine damage risk GG/GH

    The first-generation Mazda 6 petrol engines (1.8, 2.0, and 2.3 MZR units) develop excessive oil consumption as they age, typically above 80,000 miles. This is caused by worn piston rings and valve stem seals allowing oil to enter the combustion chambers. The 2.3-litre L3-VE engine is particularly affected. MOT data shows these engines failing emissions tests at significantly higher rates due to oil burning producing blue smoke during acceleration.

    What to check: Check the engine oil level on the dipstick - if it's significantly below the minimum mark despite recent servicing, this indicates consumption issues. Look at the oil filler cap and dipstick for any blue-black carbon deposits which indicate oil burning. Ask the seller how often oil needs topping ...

  6. Generally reliable vehicle with good overall durability

    Wear item GJ

    This expert database entry notes the overall reliability of the second-generation Mazda 6, particularly the petrol variants with the 2.0 Skyactiv-G and 2.5 MZR engines. These powertrains have proven durable with proper maintenance, showing lower failure rates than the first generation across multiple reliability surveys. Standard maintenance items like brake pads, tyres, and consumables wear at normal rates. The main reliability advantage comes from the improved corrosion protection on the GJ generation compared to the earlier GG/GH models.

    What to check: Review the service history for evidence of regular maintenance - well-maintained examples of these engines typically reach high mileages without major issues. Check for any obvious neglect such as dirty engine bay, worn tyres, or poor interior condition which might indicate poor overall care.

What 6s cost at dealers now

From 116 used 6s we track on UK dealer websites.

Typical asking price
£11,618
Typical mileage
57,230 miles
Price change vs last month
-14.7%

6 MOT results

23.8%

of 6 MOT tests end in a fail, from 459,210 tests.

Most common reasons for failing

  1. Anti-roll bar links wornSuspension
  2. Subframe bushes or mounts wornSuspension
  3. Seat mounting faultSeatbelts & Airbags

Check the 6 you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

6 questions

Is the Mazda 6 reliable?

23.8% of 6 models fail their MOT based on 459,210 tests analysed. That’s about average for the class. There are 6 known problems to watch for, the most serious being subframe and suspension mounting point corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Mazda 6?

The most serious known issues are subframe and suspension mounting point corrosion, dpf regeneration issues and blockage, rear suspension bush deterioration. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific 6 has been written off or had insurance claims linked to these faults.

How do I check if a Mazda 6 has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Mazda 6 has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N 6 has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Mazda 6 for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Mazda 6 fail its MOT on?

The most common MOT failure on the 6 is anti-roll bar links worn. 23.8% of 6 models fail overall, based on 459,210 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the 6

Other Mazda car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.