Mazda B Series car check
Find out if a B Series has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.
Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.
- MOT failure rate
- 29.1%26k tests
- Known problems
- 5across UF to UN
- Full report
- £7.49one-off, no subscription
Which B Series are you looking at?
Each B Series generation has its own weak spots. Pick the one you’re viewing to see what to check.
-
Chassis and body mounting point corrosion
Safety risk UF, UNThe B Series suffers extensive corrosion at critical structural mounting points where the body meets the chassis frame. MOT data shows this model fails at over 100 times the national average for mounting point corrosion, with the problem worsening significantly across all mileage bands. The commercial pickup design with separate chassis and body creates multiple corrosion trap points where moisture and debris accumulate. Salt exposure accelerates the process, with failures documented from 40,000 miles upwards.
What to check: Inspect underneath the vehicle focusing on where the cab body bolts to the chassis rails - look for brown rust staining, flaking metal, or visible perforation around mounting bolt areas. Check the rear bed mounting points and tailgate hinge areas for similar corrosion patterns. Look for recent we...
-
Structural chassis corrosion
Safety risk UF, UNThe separate chassis design of the B Series is highly susceptible to structural corrosion that compromises the vehicle's rigidity and safety. MOT data shows failure rates over 43 times the national average for structural corrosion, affecting all mileage bands from 40,000 miles upwards. The boxed chassis sections trap moisture and debris, creating ideal conditions for rust to develop undetected until it becomes severe enough to affect structural integrity.
What to check: Inspect the main chassis rails from front to rear, looking for rust perforation, especially around cross-member joints and where brackets are welded. Check inside the chassis box sections where accessible - use a torch to look for internal rust scale or perforation. Look for evidence of previous ...
-
Suspension component excessive wear
Wear item UF, UNThe B Series shows exceptional wear rates in suspension bushes, pins, and joints, with MOT data indicating failure rates over 216 times the national average. The commercial vehicle's heavy-duty use and payload capacity puts extreme stress on suspension components. The problem affects all mileage bands and has been worsening over the observation period, suggesting that replacement parts may not be matching original durability specifications.
What to check: Inspect all visible rubber bushes for cracking, perishing, or complete separation from their metal housings - pay particular attention to anti-roll bar bushes and suspension arm bushes. Check for oil contamination on bushes which accelerates rubber degradation. Look underneath for any suspension ...
-
Steering play excessive
Wear item UF, UNThe B Series steering system develops excessive free play at nearly 200 times the national fleet average, typically manifesting from 60,000 miles onwards. The recirculating ball steering box design used on these commercial vehicles is particularly prone to internal wear, creating dangerous amounts of steering play that affects vehicle control. The problem has been consistently worsening across the observation period.
What to check: With the engine off and wheels straight, turn the steering wheel left and right noting how much movement occurs before the wheels begin to turn - more than 2-3 degrees indicates excessive play. Have someone watch the wheels while you turn the steering wheel to identify where the play is occurring...
-
Load sensing valve failure
Safety and MOT risk UF, UNThe brake system load sensing valve, which adjusts rear brake pressure based on vehicle loading, fails at exceptional rates on the B Series - up to 189 times the national average. This valve is critical for proper brake balance on commercial vehicles that carry varying loads. Failure typically occurs from 60,000 miles and affects both vehicles with and without ABS, though the failure mode differs slightly between the two systems.
What to check: Locate the load sensing valve typically mounted on the rear axle or chassis rail and connected to the suspension via a mechanical linkage. Check the valve body for corrosion, damage, or hydraulic fluid leaks. Inspect the mechanical linkage arm for seizure, corrosion, or disconnection from the sus...
We haven’t flagged any common problems for this generation in our data yet. A history check still tells you about finance, write-offs and theft, and the MOT history shows how this particular car has been looked after.
B Series MOT results
of B Series MOT tests end in a fail, from 25,791 tests.
Most common reasons for failing
- Free play in the steering, measured at the rim ...Steering
- Load sensing valve seized or inoperative and AB...Brakes
- Coil springs brokenSuspension
Check the B Series you’re buying
One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.
Finance, stolen, write-off and owner history data provided by Experian.
What the check includes
- Outstanding finance Experian
- Write-off status Experian
- Stolen vehicle check Experian
- Previous owners and keeper history Experian
- MOT history and advisories DVSA
- Mileage check DVSA
- Known problems for its generation GetCarWise
- How many are left on the road DVLA
B Series questions
Is the Mazda B Series reliable?
29.1% of B Series models fail their MOT based on 25,791 tests analysed. That’s below average for the class. There are 5 known problems to watch for, the most serious being chassis and body mounting point corrosion. A full history check shows whether a specific car has had related write-offs or insurance claims.
What are the main problems with a Mazda B Series?
The most serious known issues are chassis and body mounting point corrosion, structural chassis corrosion, suspension component excessive wear. Problems vary by generation, so check which apply to the year you’re looking at. Our car check flags whether a specific B Series has been written off or had insurance claims linked to these faults.
How do I check if a Mazda B Series has outstanding finance?
Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.
How do I check if a Mazda B Series has been written off?
Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N B Series has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.
Can I check a Mazda B Series for free?
You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.
What does a Mazda B Series fail its MOT on?
The most common MOT failure on the B Series is free play in the steering, measured at the rim .... 29.1% of B Series models fail overall, based on 25,791 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.
More on the B Series
Other Mazda car checks
Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.