Home/Car check/Kia/Soul

Kia Soul car check

Find out if a Soul has outstanding finance, has been written off or stolen, how many owners it’s had, and which known problems apply to the generation you’re looking at.

Finance, stolen, write-off and owner history data provided by Experian. Results in under a minute.

Typical price
£9,192129 at dealers
MOT failure rate
20.9%79k tests
Known problems
8across PS
Full report
£7.49one-off, no subscription

Which Soul are you looking at?

Each Soul generation has its own weak spots. Here are the known problems.

  1. DPF issues

    Wear item PS

    The diesel particulate filter (DPF) on 1.6 CRDi engines blocks with soot when used primarily for short urban journeys. The system requires regular high-temperature regeneration cycles that cannot complete during stop-start driving. Blocked DPF units cause reduced power, increased fuel consumption, and limp mode activation. This is exacerbated by the Soul's typical use as an urban runabout where the DPF never reaches optimal operating temperature.

    What to check: Check the dashboard for DPF warning lights - an amber light indicates regeneration needed, red indicates system fault. Ask the seller about their driving pattern - predominantly urban use increases DPF problems. Request evidence of recent DPF regeneration services or replacement. Check for black ...

  2. Premature ball joint failure

    Wear item PS

    Front lower ball joints fail prematurely on the Soul, with MOT data showing failure rates 18.8x higher than the fleet average. The joints separate rubber seals allowing contamination and rapid wear of the bearing surfaces. This affects both steering precision and safety, with complete separation causing loss of steering control. The design appears undersized for the vehicle's weight and road conditions, with replacement joints showing similar longevity issues.

    What to check: Visually inspect ball joint dust covers for splits, tears, or missing sections. Look for grease leakage around the joint indicating seal failure. Check for excessive corrosion on the ball joint body and mounting points. Push down on each corner of the car and listen for knocking noises from the s...

  3. Universal joint deterioration

    Wear item PS

    The CV joints and flexible couplings in the driveshaft system deteriorate at 14.3x the fleet average rate, particularly on petrol variants. The rubber boots protecting the joints split prematurely allowing contamination of the bearing surfaces. This leads to clicking during turning, vibration under acceleration, and eventual joint seizure. The issue appears related to poor boot material quality and inadequate protection from road debris.

    What to check: Inspect CV joint rubber boots for splits, tears, or grease leakage around both front wheels. Look for contamination of the joint with road dirt indicating boot failure. Check for excessive grease splattered around the wheel wells. Examine the boot clamps for corrosion or looseness.

  4. Brake caliper binding

    Safety and MOT risk PS

    Brake calipers bind at 204.0x the fleet average rate, causing uneven braking force and brake drag. The rear sliding caliper design is particularly susceptible to seizure when exposed to salt corrosion and inadequate servicing. Binding calipers cause rapid brake pad wear, disc overheating, and reduced fuel economy due to constant drag. The issue affects all variants including electric models where it impacts range significantly.

    What to check: Check for uneven brake disc wear between left and right sides indicating caliper binding. Look for excessive brake dust buildup on one wheel compared to others. Touch each brake disc after a short drive - binding calipers cause one disc to remain hot. Check brake fluid level and colour for signs ...

  5. Brake hose ferrule corrosion

    Safety and MOT risk PS

    Brake hose ferrules corrode at 204.0x the fleet average rate, particularly affecting the connection points between flexible brake hoses and rigid brake lines. The steel ferrules are inadequately protected against corrosion and fail prematurely in UK conditions. This causes brake fluid leaks, loss of braking pressure, and potential brake system failure. The issue affects all variants equally as it relates to the basic brake line design.

    What to check: Inspect all brake hose connections for corrosion, particularly where flexible hoses meet rigid lines. Look for brake fluid staining around hose ferrules indicating leakage. Check brake fluid level - low level may indicate ongoing leakage. Examine brake hoses for swelling, cracking, or surface dam...

  6. Carbon buildup in intake valves

    Engine damage risk PS

    Direct injection petrol engines suffer carbon buildup on intake valves because fuel is not sprayed over the valve surfaces to clean them. The Gamma GDI engine uses a positive crankcase ventilation system that routes oil vapour through the intake manifold, depositing carbon on valve surfaces over time. This causes reduced power, rough idle, and poor fuel economy. Unlike port injection engines, the problem is inherent to the GDI design and affects all variants.

    What to check: Check service history for evidence of carbon cleaning services - professional walnut blasting should be performed every 60,000-80,000 miles. Ask about fuel economy deterioration or power loss over time. Look for evidence of intake manifold removal in service records.

  7. Excessive steering play

    Wear item PS

    The steering system develops excessive free play measured at the steering wheel rim, failing MOT tests at 72.3x the fleet average rate. This typically results from wear in the steering column universal joints, intermediate shaft, or steering rack internal components. The issue affects steering precision and driver confidence, particularly during motorway driving where constant correction becomes necessary.

    What to check: With the engine off and wheels straight, turn the steering wheel left and right noting free movement before the wheels begin to turn. Check for excessive movement in the steering column by pushing and pulling the wheel in and out. Look under the bonnet for play in the steering shaft universal joi...

  8. Generally reliable

    Wear item PS

    The electric Soul demonstrates above-average reliability with minimal mechanical complexity compared to internal combustion variants. The drivetrain consists of a single electric motor, reduction gearbox, and lithium-ion battery pack with active thermal management. Main service requirements are brake fluid changes, cabin filter replacement, and battery coolant system maintenance. The 27kWh battery pack shows good longevity with minimal degradation reported in UK conditions.

    What to check: Check charging port condition for corrosion or damage. Verify battery charge level and remaining range display functionality. Ask for evidence of regular battery health checks and coolant system maintenance.

What Souls cost at dealers now

From 129 used Souls we track on UK dealer websites.

Typical asking price
£9,192
Typical mileage
56,627 miles
Price change vs last month
+23.7%

Soul MOT results

20.9%

of Soul MOT tests end in a fail, from 78,642 tests.

Most common reasons for failing

  1. Parking brake inefficientBrakes
  2. Headlight faultLights & Electrics
  3. Excessive wear or play in a universal joint or ...Steering

Check the Soul you’re buying

One report covers outstanding finance, write-offs, theft and previous owners from Experian, plus MOT history, mileage and the known problems for its generation.

Finance, stolen, write-off and owner history data provided by Experian.

What the check includes

Soul questions

Is the Kia Soul reliable?

20.9% of Soul models fail their MOT based on 78,642 tests analysed. That’s about average for the class. There are 8 known problems to watch for, the most serious being dpf issues. A full history check shows whether a specific car has had related write-offs or insurance claims.

What are the main problems with a Kia Soul?

The most serious known issues are dpf issues, premature ball joint failure, universal joint deterioration. Our car check flags whether a specific Soul has been written off or had insurance claims linked to these faults.

How do I check if a Kia Soul has outstanding finance?

Enter the registration on this page. We query Experian’s finance database and return any outstanding agreements within a minute. If finance is still owed, the finance company can legally repossess the car even after you’ve paid the seller. At £7.49, you can check before you buy.

How do I check if a Kia Soul has been written off?

Our check queries Experian’s insurance write-off database for Cat A, B, S and N markers. A Cat S or N Soul has been structurally or non-structurally damaged and repaired. This doesn’t mean it’s unsafe, but it affects resale value and some insurers won’t cover it. The check costs £7.49.

Can I check a Kia Soul for free?

You can check MOT history free on GOV.UK, which shows past test results and advisories. What it won’t show is outstanding finance, write-offs or theft markers, which are the things that actually cost you money after you’ve bought. Our full check adds all of that for £7.49, using Experian data.

What does a Kia Soul fail its MOT on?

The most common MOT failure on the Soul is parking brake inefficient. 20.9% of Soul models fail overall, based on 78,642 tests. Checking a car’s full MOT history before buying shows you recurring problems the seller might not mention.

More on the Soul

Other Kia car checks

Finance, stolen, write-off and owner history data provided by Experian. MOT data from DVSA. Known problems from GetCarWise analysis. Updated October 2026.